<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>رئیس دانشکده مهندسی برق و کامپیوتر</PublisherName>
				<JournalTitle>مجله مهندسی برق دانشگاه تبریز</JournalTitle>
				<Issn>2008-7799</Issn>
				<Volume>49</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2020</Year>
					<Month>02</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>An Algorithm for Fault Detection in HVDC Transmission Lines</ArticleTitle>
<VernacularTitle>الگوریتمی جهت آشکارسازی خطا در خطوط انتقال HVDC</VernacularTitle>
			<FirstPage>1439</FirstPage>
			<LastPage>1449</LastPage>
			<ELocationID EIdType="pii">10510</ELocationID>
			
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>مهدی</FirstName>
					<LastName>اخباری</LastName>
<Affiliation>دانشکده فنی مهندسی - دانشگاه شاهد</Affiliation>

</Author>
<Author>
					<FirstName>حامد</FirstName>
					<LastName>سوری</LastName>
<Affiliation>دانشکده فنی مهندسی - دانشگاه شاهد</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2017</Year>
					<Month>02</Month>
					<Day>23</Day>
				</PubDate>
			</History>
		<Abstract>In this paper, an algorithm is proposed for fault detection in HVDC lines using transient characteristic of the fault component of voltage and current measured on one side of the transmission line. In the proposed algorithm, when the starting unit of the protection system confirms the occurrence of fault, the fault voltage, and current correlation level is used to determine the fault direction and then by using high-frequency harmonic component of the fault current the fault is detected in the protective zone. Finally, by removing the coupling between the currents of positive and negative poles the faulted line is distinguished from a healthy line in the DC bipolar system. The simulation results for a variety of faults verify the validity of the proposed method.</Abstract>
			<OtherAbstract Language="FA">در این مقاله با استفاده از مشخصه‌ی گذرای مؤلفه‌ی خطای ولتاژ و جریان اندازه­گیری­شده در یک طرف خط انتقال، الگوریتمی برای آشکارسازی خطا در خطوط HVDC پیشنهاد شده­است. در الگوریتم پیشنهادی، هنگامی­که واحد شروع عملکرد حفاظت در سیستم حفاظت وجود خطایی را تایید کند، الگوریتم آشکارساز خطا از میزان همبستگی سیگنال‌های ولتاژ و جریان خطا برای تعیین جهت خطا استفاده می­کند، سپس با استفاده از مولفه هارمونیکی فرکانس‌ بالای  جریان خطا، وجود خطا در زون حفاظتی تشخیص داده می­شود. درانتها، با حذف کوپلینگ بین جریان‌های قطب مثبت و منفی خط انتقال، قطب دارای خطا از قطب سالم در سیستم دوقطبی‌ تمایز داده می­شود. نتایج شبیه­سازی برای انواع خطا‌ها گویای صحت عملکرد روش پیشنهادی می‌باشد.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">خطوط انتقال جریان مستقیم ولتاژ بالا</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">آشکار‌سازی خطا</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">حفاظت سیستم قدرت</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">ضریب همبستگی</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://tjee.tabrizu.ac.ir/article_10510_6db52d0f2d296d504faf18734ce15874.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
