@article { author = {Naseri, N. and Ghattan Kashani, Z.}, title = {Compact Ultra Wideband Power Divider with Low Amplitude Imbalance and High Isolation}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {50}, number = {4}, pages = {1865-1872}, year = {2021}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {In this paper an ultra-wideband power divider has been designed, simulated and fabricated. In this structure, the quarter-wave transformer in the conventional Wilkinson power divider, is replaced by an exponentially tapered microstrip line. Since the tapered line provides a consistent impedance transformation across all frequencies, very low amplitude ripple of 0.5dB peak-to-peak in the transmission coefficient and superior input return loss better than 15dB are achieved over an ultra-wide bandwidth. By optimizing the physical locations of the two additional standard resistors added along the tapered line, the output return loss and isolation are improved. The simulation results achieved by full wave analysis based on Finite Element Method (FEM) and the measured results confirm the good performance of the proposed circuit. The return loss of the output ports is better than 15dB and the isolation between the output ports is better than 20dB across the band 6-16GHz. Finally a comparison between ultra-wideband power dividers is provided. It is clear that the proposed divider in terms of the aforementioned important features, has a good performance related to the other ultra-wideband power dividers.}, keywords = {Power divider,ultra wideband,amplitude imbalance,Isolation}, title_fa = {تقسیم‌کننده‌ی توان فراپهن‌باند کوچک با کم‌ترین خطای دامنه و بیشترین جداسازی}, abstract_fa = {در این مقاله یک تقسیم‌کننده‌ی توان فراپهن‌باند طراحی، شبیه‌سازی و ساخته شده است. در این ساختار به‌جای مبدل ربع طول موج در تقسیم‌کننده‌ی توان ویلکینسون معمولی، از خط میکرواستریپ باریک‌شونده‌ی نمایی استفاده شده است. از آنجایی‌که خط باریک‌شونده در همه‌ی فرکانس‌ها یک انتقال امپدانس ثابتی ایجاد می‌کند، اختلاف بیشترین و کم‌ترین مقدار در ضریب انتقال بسیار کم و برابر با dB 0.5 و مقدار افت بازگشتی بسیار خوب و بهتر از dB15 در یک پهنای باند بسیار وسیع به‌دست آمده است. با بهینه‌سازی مکان دو مقاومت استاندارد اضافی که در طول خط باریک‌شونده اضافه شده‌اند، افت بازگشتی و جداسازی بین دهانه‌های خروجی بهبود یافته است. نتایج شبیه‌سازی با تحلیل تمام موج مبتنی‌بر روش المان محدود به‌دست آمده است و نتایج اندازه‌گیری حاکی از عملکرد خوب مدار پیشنهادی است. افت بازگشتی دهانه‌های خروجی در باند فرکانسی GHz16-6 بهتر از dB15 و جداسازی بین دهانه‌های خروجی بهتر از dB20 است. در انتها یک مقایسه بین تقسیم‌کننده‌های توان فراپهن‌باند انجام شده است. به‌راحتی می‌توان دریافت که تقسیم‌کننده‌ی توان پیشنهادی از نظر ویژگی‌های مهم مطرح‌شده، عملکرد خوبی نسبت به سایر تقسیم‌کننده‌های توان فراپهن‌باند دارد. }, keywords_fa = {تقسیم‌کننده‌ی توان,فراپهنباند,خطای دامنه,جداسازی}, url = {https://tjee.tabrizu.ac.ir/article_12588.html}, eprint = {https://tjee.tabrizu.ac.ir/article_12588_3c67a2f406253b1096dd7310db5f1527.pdf} }