@article { author = {Asyaei, M.}, title = {Enhanced Current Comparison Based Domino for Design of Low Power Wide Fan-In Gates}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {1-10}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {In this paper, a new domino circuit is proposed to reduce power consumption of wide fan-in gates without considerable speed degradation. In the proposed domino circuit technique, current of the pull-down network is compared with a reference current to generate the proper output voltage. In this way, voltage swing of the pull-down network can be decreased to reduce power consumption. Moreover, a transistor in diode configuration is employed in series with the pull-down network to decrease the sub-threshold leakage current and increase the noise immunity. Simulation of wide fan-in OR gates are performed using HSPICE simulator in a 90nm CMOS technology model. Simulation results demonstrate 39% power reduction and 2.1× noise-immunity improvement at the same delay compared to the standard domino circuit for 64-bit OR gates.}, keywords = {Domino logic,wide fan-in gates,leakage current,noise immunity}, title_fa = {دومینو مبتنی بر مقایسه جریان ارتقاءیافته برای طراحی گیت‌های عریض توان پایین}, abstract_fa = {در این مقاله یک مدار دومینو جدید برای کاهش توان مصرفی گیت‌های عریض بدون کاهش چشم‌گیر سرعت پیشنهاد می‌شود. در تکنیک مداری پیشنهادی از مقایسه جریان شبکه پایین‌کش با جریان مرجع جهت تولید خروجی مناسب استفاده می‌شود. بدین طریق دامنه تغییرات دو سر شبکه پایین‌کش کم شده و توان مصرفی کاهش می‌یابد. همچنین از یک ترانزیستور در حالت دیودی به‌صورت سری با شبکه پایین‌کش استفاده شده است تا جریان نشتی زیر آستانه کاهش و مصونیت در برابر نویز افزایش یابد. شبیه‌سازی گیت‌های OR عریض با استفاده از نرم‌افزار HSPICE در فناوری 90 نانومتر CMOS انجام شده است. نتایج شبیه‌سازی گیت‌های OR 64 بیتی در تأخیر یکسان، 39% کاهش توان و 2.1 برابر بهبود مصونیت در برابر نویز را نسبت به مدار دومینو استاندارد نشان می‌دهند.}, keywords_fa = {منطق دومینو,گیت‌های عریض,جریان نشتی,مصونیت در برابر نویز}, url = {https://tjee.tabrizu.ac.ir/article_5318.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5318_777ef0f3787b6c189dca6af55cff4e9b.pdf} } @article { author = {Aghaei, J. and Bagheri, S. E. and Shafiee, S. and Niknam, T. and Bagheri, S. M.}, title = {Assessment of Smart Distribution System Response to Operating Characteristics of Plug-in Hybrid Electric Vehicles}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {11-20}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {In this paper a comprehensive and accurate study is proposed to investigate the PHEVs impact on residential distribution network. In order to evaluate the impact of PHEVs on distribution network, characteristics of PHEVs are accurately modeled. PHEVs characteristics including battery capacity, state of charge (SOC), and the amount of energy required for charging PHEVs. The proposed model is applied to a 33-bus system in order to evaluate and investigate the growth rate of PHEVs penetration levels on distribution network. Results demonstrate that the amount of peak load, loss, and peak to average ratio (PAR) increment due to PHEVs penetration growth. So, in order to reduce the peak load, loss, and PAR, demand response (DR) programs are proposed. Time of use (TOU) program is considered for performing demand response programs. Results depict that DR programs decrease the amount of peak load, loss, and PAR.}, keywords = {Plug-in hybrid electric vehicle (PHEV),demand response (DR),time-of-use (TOU),network losses,and peak to average ratio (PAR)}, title_fa = {بررسی پاسخ‌گویی شبکه توزیع هوشمند به عملکرد خودروهای الکتریکی هیبریدی قابل اتصال به شبکه}, abstract_fa = {در این مقاله یک مدل جامع و دقیق برای بررسی تأثیر خودروهای الکتریکی هیبریدی قابل اتصال به شبکه بر روی شبکه توزیع مسکونی ارائه شده است. به‌منظور ارزیابی تأثیر این خودروها بر روی شبکه توزیع، مشخصات آن‌ها به‌صورت دقیق مدل شده است. این مشخصات شامل ظرفیت باتری، مشخصه حالت شارژ و مقدار انرژی موردنیاز برای شارژ باتری است. به‌منظور ارزیابی و بررسی تأثیر نرخ رشد سطح نفوذ خودروهای الکتریکی هیبریدی قابل اتصال به شبکه بر روی شبکه توزیع، مدل ارائه‌شده بر روی یک سیستم 33 باسه اعمال شده است. نتایج نشان می‌دهد، که به‌علت افزایش سطح نفوذ این خودروها مقدار بیشینه بار، تلفات و نسبت بیشینه به متوسط بار افزایش می‌یابد. بنابراین به‌منظور کاهش مقدار بیشینه بار، تلفات و نسبت بیشینه به متوسط بار برنامه‌های پاسخ‌گویی بار ارائه شده است. برای اجرای برنامه‌های پاسخ‌گویی بار، برنامه زمان استفاده در نظر گرفته شده است. نتایج نشان می‌دهد که برنامه‌های پاسخ‌گوی بار باعث کاهش مقدار پیک‌بار، تلفات و نسبت پیک‌بار به متوسط بار می‌شود.}, keywords_fa = {خودروی الکتریکی هیبریدی قابل اتصال به شبکه,برنامه پاسخ‌گویی بار,قیمت زمان استفاده,تلفات شبکه,نسبت پیک‌بار به متوسط بار}, url = {https://tjee.tabrizu.ac.ir/article_5290.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5290_7e11b44a4c8ee842bb2cd2b2f9c937d1.pdf} } @article { author = {Basaery, D. and Razavi, S. M. J. and Mohseni Armaki, S. H.}, title = {Analysis of the Effect of Finite Circular Ground Plane on the Wire Monopole Antennas}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {21-28}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {In this paper, the effect of the finite ground plane on the antenna radiation pattern is analyzed and presented. The radiation pattern of simple wire monopoles and a blade-shaped meanderline monopole - that loaded with lumped elements and covers the 30-500MHz bandwidth - is calculated using the Geometrical Theory of Diffraction (GTD) and the Equivalent Edge Current (EEC) analytical methods. Results show that the GTD method loses its efficiency when the ground plane is small and the EEC Method results a more accurate far field pattern in this case.}, keywords = {Wire monopole antenna,circular finite ground plane,diffraction method,equivalent edge current method,inverted-F antenna,T antenna,inverted-L antenna,blade antenna}, title_fa = {تحلیل اثرات صفحه زمین دایروی محدود در آنتن‌های تک‌قطبی سیمی}, abstract_fa = {در این مقاله اثر صفحه زمین محدود آنتن بر الگوی تشعشعی آن تحلیل و بررسی شده است. الگوی تشعشعی چند نمونه آنتن تک‌قطبی سیمی ساده و یک آنتن تک‌قطبی خط‌پیچ‌دار تیغه‌ای‌شکل -که با المان‌های فشرده بارگذاری شده و پهنای باند 30-500 MHz را پوشش می‌دهد- با صفحه زمین‌های محدود با روش‌های تحلیلی تفرق هندسی (GTD) و جریان معادل لبه (EEC) محاسبه شده‌اند. نتایج تحلیلی و شبیه‌سازی‌ها نشان می‌دهد که روش GTD در حالتی که ابعاد صفحه زمین کوچک باشد کارایی خود را از دست می‌دهد و اعمال روش EEC در این حالت پترن میدان دور دقیق‌تری را از آنتن نتیجه می‌دهد.}, keywords_fa = {آنتن تک‌قطبی سیمی,صفحه زمین دایروی محدود,روش تفرق,روش جریان معادل لبه,آنتن F معکوس,آنتن T شکل,آنتن L معکوس,آنتن تیغه‌ای}, url = {https://tjee.tabrizu.ac.ir/article_5307.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5307_4a5ffd4a6f72ddf02432f78d75ba7aa4.pdf} } @article { author = {Parandeh, M. and Aghdasi, S. H.}, title = {Position-based Energy-Efficient Data Forwarding Protocol for Visual Sensor Networks}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {29-38}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {Recently, Visual Sensor Networks (VSNs) consisting of camera nodes have emerged as a new class of wireless networks. Low-capability camera nodes have the ability to capture and transmit visual data cooperatively. VSNs realize many applications by relying on the achieved information from camera nodes and transmitting important data to a specific destination (Sink). Based on literature, many position-based routing protocols have been proposed for VSNs which consider application requirements and camera nodes characteristics. In most of these protocols, maintaining neighborhood information by sending periodic control messages increases energy consumption in camera nodes. There are a few protocols without using periodic control messages. However, they suffer from injection of redundant data to the network. In this paper, Energy-Efficient data Forwarding protocol (EEF) in VSNs is proposed. This protocol which is based on camera nodes’ positions, uses greedy forwarder selection method to forward data without exchanging periodic control messages and utilizes waiting time mechanism. Simulation results show that the EEF decreases injected redundant data to the network and has better balancing in energy consumption of camera nodes in comparison with the state-of-the-art protocols.}, keywords = {Visual sensor networks,position-based routing protocol,minimum redundant data,Energy efficiency,prolonging network lifetime}, title_fa = {ارائه پروتکل ارسال داده انرژی-کارا مبتنی بر موقعیت برای شبکه‌های حسگر بصری}, abstract_fa = {در سال‌های اخیر، شبکه‌های حسگر بصری (VSNs) متشکل از گره‌های دوربین‌دار، به‌عنوان کلاس جدیدی از شبکه‌های بی‌سیم به‌وجود آمده‌اند. گره‌های دوربین‌دار علی‌رغم محدودیت منابع، با همکاری همدیگر قابلیت ثبت و ارسال داده‌های تصویری را دارند. شبکه‌های حسگر بصری کاربردهای بسیاری را با تکیه بر اطلاعات به‌دست‌آمده از گره‌های دوربین‌دار و ارسال داده‌های مهم به‌سمت مقصد مشخص (چاهک) تحقق می‌بخشند. بررسی‌ها نشان می‌دهد که تاکنون پروتکل‌های مسیریابی مبتنی بر موقعیت زیادی برای شبکه‌های حسگر بصری ارائه شده است که نیازمندی‌های برنامه‌های کاربردی و ویژگی‌های گره‌های دوربین‌دار را در نظر گرفته‌اند. در بسیاری از این پروتکل‌ها، ذخیره کردن اطلاعات همسایه‌ها از طریق ارسال پیام‌های کنترلی، باعث افزایش انرژی مصرفی در گره‌ها شده است. تعداد اندکی از پروتکل‌ها وجود دارند که از پیام‌های کنترلی برای مسیریابی استفاده نمی‌کنند، اما آن‌ها نیز از تزریق داده افزونه به شبکه رنج می‌برند. در این مقاله، پروتکل ارسال داده انرژی-کارا (EEF) برای شبکه‌های حسگر بصری ارائه می‌شود. این پروتکل که مبتنی بر موقعیت گره‌های دوربین‌دار است، از روش انتخاب ارسال‌کننده حریصانه برای ارسال اطلاعات بدون نیاز به تبادل پیام کنترلی و با تکیه بر مکانیسم زمان انتظار استفاده می‌کند. نتایج شبیه‌سازی نشان می‌دهد که پروتکل EEF تعداد داده‌های تزریقی افزونه به شبکه را به حداقل رسانده و باعث ایجاد تعادل در مصرف انرژی گره‌ها در مقایسه با جدیدترین پروتکل‌ها در این زمینه می‌شود.}, keywords_fa = {شبکه‌های حسگر بصری,پروتکل مسیریابی مبتنی بر موقعیت,کاهش داده افزونه,بهبود مصرف انرژی,افزایش طول عمر شبکه}, url = {https://tjee.tabrizu.ac.ir/article_5291.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5291_ccbbde7baaa7eea6a8a74984b11b83d2.pdf} } @article { author = {Teimourzadeh, S. and Aminifar, F. and Sanaye-Pasand, M.}, title = {Inter-Area Oscillation Damping: A Fuzzy Logic based Wide-Area Load Shedding\Generation Rejection Scheme}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {39-48}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {In this paper, a new inter-area oscillation damping approach is proposed based on system-wide measurement data. The load shedding and generation rejection are the main tools which are utilized for inter-area oscillations damping purpose. The proposed scheme is a defense plan deployable whenever the performance of existing controllable devices, say FACTS, are inadequate. The proposed method is founded on the basis of a four-layer framework including data acquisition, oscillation detection, decision making, and application layers. The decision making process is based on the Fuzzy logic engine. The input signals are rotor angular velocity and its associated derivative; besides, the outputs of the new defense plan are the load shedding or generation rejection commands. Comprehensive simulation studies on a two-area system confirm validity of the proposed scheme under various situations.}, keywords = {Inter-area oscillations,Fuzzy logic,wide-area measurements,load shedding,generation rejection}, title_fa = {میراسازی نوسانات بین‌ناحیه‌ای: طرح گسترده هماهنگی حذف بار و تولید مبتنی بر منطق Fuzzy}, abstract_fa = {در این مقاله، روش جدیدی جهت میراسازی نوسانات بین‌ناحیه‌ای با استفاده از داده‌های فراهم‌شده توسط سیستم اندازه‌گیری گسترده، ارائه شده است. ابزارهای مورد استفاده در این روش قطع بار، حذف تولید و یا هر دو می‌باشند. روش پیشنهادی یک طرح مقابله اضطراری بوده و برای حالاتی که عملکرد عناصر کنترل‌پذیر موجود در شبکه کفایت نکنند، قابل‌استفاده است. این روش در چهار لایه دریافت اطلاعات، تشخیص نوسان، تصمیم‌گیری و لایه عملگر طراحی شده است. هسته اصلی تصمیم‌گیری بر مبنای منطق ‌Fuzzy می‌باشد. سیگنال‌های سرعت روتور ژنراتورهای نماینده هر ناحیه و نرخ تغییرات آن‌ها به‌عنوان اطلاعات دریافتی و فرمان قطع بار/ حذف تولید به‌عنوان خروجی این طرح دفاعی می‌باشند. مطالعات شبیه‌سازی بر روی یک سیستم دوناحیه‌ای کارایی روش پیشنهادی را در شرایط مختلف تأیید می‌نمایند.}, keywords_fa = {نوسانات بین‌ناحیه‌ای,منطق Fuzzy,سیستم‌های اندازه‌گیری گسترده,قطع بار,حذف تولید}, url = {https://tjee.tabrizu.ac.ir/article_5302.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5302_cb699c109055d55d5c1bff0ac526adbd.pdf} } @article { author = {Teimouri, M. and Kakaei Motlagh, H. R. and Haddadi, M.}, title = {Blind Recognition of BCH Product Codes}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {49-54}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {As a result of growing application of concatenated codes such as product codes in military wireless communication systems, the ability of blind recognition and reconstruction of such codes in electronic warfare (EW) systems is one of the important necessities. So far, diverse methods for recognition of forward error correction (FEC) codes have been suggested; however, in terms of blind recognition of TPCs no method has been introduced yet. In this paper, we have tried to generalize the existing methods for recognition of two-dimensional TPCs. We apply two well-known methods of blind recognition, i.e. greatest common divisor (GCD) and matrix rank (MR), for recognition of these codes. Based on these methods, code parameters, i.e. code word length, message length, and the structure of code are determined. Simulation results are presented and analyzed which prove the effectiveness of the proposed method.}, keywords = {Product codes,blind recognition,GCD method,MR method}, title_fa = {شناسایی کور کدهای ضربی BCH}, abstract_fa = {با توجه به کاربردهای روزافزونی که کدهای ترکیبی به‌خصوص کدهای ضربی در سامانه‌های مخابرات بی‌سیم نظامی و ارتباطی دارند، توانایی شناسایی کور این کدها در سامانه‌های جنگ الکترونیک یکی از نیازهای دانش‌بنیان است. تاکنون روش‌های مختلفی برای شناسایی کدهای تشخیص خطای کانال ارائه گردیده است، اما در زمینه شناسایی کور کدهای ضربی هیچ روشی معرفی نشده است. در این مقاله با معرفی کدهای ضربی دوبعدی، تلاش نموده‌ایم با استفاده از توسعه روش‌های موجود شناسایی کدهای کانال جهت شناسایی کور کدهای ضربی اقدام نماییم. به همین منظور از دو روش شناخته‌شده بزرگ‌ترین شمارنده مشترک (GCD) و رتبه ماتریس (MR) برای شناسایی این نوع کدها استفاده نموده‌ایم. با استفاده از این روش‌ها پارامترهای کد (طول کد و طول پیام) و ساختار آن استخراج می‌شوند. نتایج شبیه‌سازی نشان می‌دهند که روش‌های پیشنهادی کارایی مناسبی در شناسایی این کدها دارند.}, keywords_fa = {کد ضربی,شناسایی کور,روش GCD,روش MR}, url = {https://tjee.tabrizu.ac.ir/article_5310.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5310_fc24f1b8bed4af045f7dd480070e4131.pdf} } @article { author = {Halvaei Niasar, A. and Faraji, A.}, title = {Sensorless Selective Torque Harmonic Elimination Control for a Non-Sinusoidal Permanent Magnet Brushless Motor Using a Full-Order Sliding Mode Observer}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {55-68}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {Nowadays, due to excellent advantages of permanent magnet brushless motors (PMBL) such as high efficiency and high torque/power density, they are used in many industrial and variable-speed electrical drives applications. If the fabricated PMBL motor has neither sinusoidal nor trapezoidal back-EMF voltages, it is named non-sinusoidal (or non-ideal) PMBL motor. Employing of conventional control strategies of PMSMs and BLDCMs decreases the efficiency and leads to unwanted torque ripple, vibration and acoustic noises. Moreover, in many applications to reduce the cost and enhance the reliability of drive, sensorless control techniques are used. This paper proposes a novel sensorless control for a non-sinusoidal PMBL motor with minimum torque ripple. To develop smooth torque, the selected torque harmonic elimination strategy is employed. Furthermore, to estimate the rotor position and speed, a novel full-order sliding mode observer is designed. The proposed observer is robust to uncertainty in back-EMF voltage contents and able to run the motor from standstill with close loop control scheme. The advantages of torque ripple minimization rather than conventional control methods and capabilities of sensorless strategy are demonstrated with some simulations.}, keywords = {Electrical drive,sensorless control,sliding mode observer,non-sinusoidal brushless motor,torque ripple}, title_fa = {کنترل بدون حسگر موتور بدون جاروبک آهنربای دائم غیرسینوسی برمبنای روش حذف هارمونیک گشتاور انتخابی و با استفاده از رؤیت‌گر مود لغزشی مرتبه‌کامل}, abstract_fa = {امروزه موتورهای بدون جاروبک آهنربای دائم (PMBL) به‌دلیل مزایایی چون بهره زیاد و چگالی گشتاور و توان بالا، در بسیاری از کاربردهای صنعتی و محرکه‌های الکتریکی سرعت متغیر به‌کار گرفته شده‌اند. در حالتی که موتور طراحی‌شده دارای ولتاژ ضدمحرکه سینوسی (PMSM) و یا ذوزنقه‌ای (BLDC) نباشد، به آن موتور PMBL غیرسینوسی (یا غیرایده‌آل) گویند. به‌کارگیری روش‌های کنترلی مرسوم این دو نوع موتور سبب کاهش بهره، ایجاد ضربان‌های گشتاور ناخواسته و بروز لرزش و نویز صوتی در موتور PMBL غیرسینوسی می‌گردد. علاوه بر آن در بسیاری از کاربردها، جهت کاهش هزینه محرکه و یا بالا بردن قابلیت اطمینان از روش‌های کنترل بدون حسگر استفاده می‌گردد. این مقاله به ارائه یک روش کنترلی بدون حسگر برای موتور PMBL غیرسینوسی با هدف ایجاد حداقل ضربان گشتاور می‌پردازد. جهت ایجاد گشتاور با حداقل ضربان از روش حذف هارمونیک گشتاور انتخابی استفاده می‌گردد. همچنین جهت تخمین سرعت و موقعیت روتور، یک رؤیت‌گر مود لغزشی جدید نوع مرتبه‌کامل طراحی می‌گردد. رؤیت‌گر طراحی‌شده نسبت به هارمونیک‌ها و نامعینی‌های موجود در ولتاژ ضدمحرکه مقاوم بوده و قابلیت راه‌اندازی حلقه‌بسته موتور را دارد. برتری روش کنترلی ارائه‌شده در مقایسه با سایر روش‌های کنترلی مرسوم و قابلیت الگوریتم تخمین موقعیت و سرعت روتور با استفاده از شبیه‌سازی صحه‌گذاری می‌گردد.}, keywords_fa = {محرکه الکتریکی,کنترل بدون حسگر,رؤیت‌گر مود لغزشی,موتور بدون جاروبک غیرسینوسی,ضربان گشتاور}, url = {https://tjee.tabrizu.ac.ir/article_5308.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5308_7950e65f2f1c0134cb71b95768e71e45.pdf} } @article { author = {Khanbabaie Gardeshi, H. and Torkaman, H.}, title = {Improved Control of Switched Reluctance Motor at High Speeds using Continuous Conduction Mode}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {69-79}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {High speed switched reluctance drives have found a good place in multifarious industries such as blowers، centrifuges and turning machines، because of their simple and robust structure، and appropriate operating at very high speeds. Losing the capability of high torque production at high speeds is one of the main problems that high speed drives deal with. Different methods have already been proposed to overcome this obstacle. Some of them have paid their attention to motor design and some other to control design. In this paper a novel method has proposed to control of high speed switched reluctance motor using both continuous and discontinuous conduction modes. Having four control parameters، This new method can control the machine torque in continuous conduction mode. To verify the effectiveness of the method، simulation using software were implemented.}, keywords = {Electric drives,high speed drives,switched reluctance motor,torque control,speed control}, title_fa = {کنترل بهبودیافته سرعت موتور سوئیچ‌شونده رلوکتانسی با استفاده از هدایت پیوسته جریان در سرعت بالا}, abstract_fa = {محرکه‌های سرعت بالای سوئیچ‌شونده رلوکتانسی به‌علت داشتن ساختار ساده، ارزان و عملکرد مناسب در سرعت‌های بسیار بالا جایگاه ویژه‌ای در صنایع مختلف ازجمله دمنده‌ها، سانتریفیوژها و ماشین‌های تراش‌کاری پیدا کرده‌اند. یکی از مشکلاتی که تمامی محرکه‌ها ازجمله محرکه موتور سوئیچ‌شونده رلوکتانسی با آن مواجه است کاهش توانایی تولید گشتاور در سرعت بالا است. تاکنون روش‌های مختلفی برای فائق آمدن بر این مشکل ارائه شده است. برخی روش‌ها به طراحی موتور و برخی دیگر به طراحی روش‌های کنترلی پرداخته‌اند. در این مقاله یک روش جدید برای کنترل موتور سوئیچ‌شونده رلوکتانسی در سرعت بالا ارائه شده است که از هر دو حالت هدایت ناپیوسته و هدایت پیوسته جریان بهره می‌گیرد. این روش با داشتن چهار پارامتر کنترلی، توانایی کنترل گشتاور موتور در ناحیه هدایت پیوسته را دارد. برای راستی آزمایی روش، از شبیه‌سازی نرم‌افزاری استفاده شده است و نتایج به‌صورت مبسوط تحلیل شده‌اند.}, keywords_fa = {محرکه‌های الکتریکی,محرکه پرسرعت,موتور سوئیچ‌شونده رلوکتانسی,کنترل گشتاور,کنترل سرعت}, url = {https://tjee.tabrizu.ac.ir/article_5296.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5296_8649490e8bbf3df7a368a0878504af05.pdf} } @article { author = {Zafarani-Moattar, E. and Feizi-Derakhshi, M. R. and Roohany, A.}, title = {The Intelligent and Automatic Detection of Type Errors in Large Databases without using Dictionary}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {81-91}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {Type errors are one of the main problems in computer systems and database systems. Existence of type errors within databases, not only causes accuracy problem for database, but also leads user to re-enter the record into database because the entered record could not be found. It results in redundancy. The existing error detection methods are based on dictionary. It means that they use a large dictionary whose all words are assumed true and if a word is not in the dictionary, it is detected as a type error. Providing a large dictionary with high precision is expensive and time consuming. In addition, such a dictionary belongs to a special field (for example, medical environment) and is not applicable in other fields (such as sociology). In this paper, a method is presented that could detect type errors without requiring a dictionary. The proposed method has been evaluated with some common criteria. The experimental results show 93.5 percent precision for this method. In addition to the high precision of the proposed method, not requiring a dictionary is considered as its unique feature.}, keywords = {Detection of type errors,spelling errors,Fuzzy}, title_fa = {تشخیص هوشمند و خودکار غلط‌های تایپی در پایگاه‌داده‌های بزرگ بدون استفاده از لغت‌نامه}, abstract_fa = {غلط‌های تایپی یکی از مشکلات مهم در سیستم‌های کامپیوتری و سیستم‌های پایگاه‌داده‌ای است. وجود غلط‌های تایپی در پایگاه‌داده‌ها نه تنها از نظر صحت پایگاه‌داده مشکل‌ساز هستند، بلکه باعث می‌شوند به هنگام ضرورت نتوان رکورد واردشده را بازیابی کرد. همین امر گاه باعث می‌شود که کاربر مجدداً همان رکورد را وارد پایگاه‌داده نماید که منجر به وجود آمدن افزونگی می‌گردد. روش‌های موجود تشخیص غلط‌ها، مبتنی بر لغت‌نامه هستند. بدین معنی که از یک لغت‌نامه بزرگ که همه لغات آن صحیح فرض می‌شوند استفاده می‌کنند و اگر کلمه‌ای در لغت‌نامه نباشد به‌عنوان غلط تایپی شناخته می‌شود. تهیه لغت‌نامه‌ای بزرگ و با دقت بالا بسیار پرهزینه و زمان‌بر است. به‌علاوه چنین لغت‌نامه‌ای مختص یک زمینه خاص (مثلاً محیط پزشکی) است و قابل‌استفاده و در زمینه‌های دیگر (مثلاً جامعه‌شناسی) نیست. در این مقاله روشی ارائه می‌شود که بدون نیاز به لغت‌نامه می‌تواند غلط‌های تایپی را تشخیص دهد. روش پیشنهادی با چند معیار مرسوم ارزیابی شده است. نتایج آزمایش‌ها نشان‌دهنده دقت 93.5 درصدی برای این روش است. علاوه‌بر دقت بالای روش پیشنهادی، عدم‌نیاز به لغت‌نامه یک ویژگی منحصر به فرد برای آن به‌شمار می‌رود.}, keywords_fa = {تشخیص غلط‌های تایپی,غلط‌های املایی,فازی}, url = {https://tjee.tabrizu.ac.ir/article_5303.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5303_7ddca57eb70ba9509ed687fcc5a75d76.pdf} } @article { author = {Zeinadini, Z. and Firouzeh, Z. H. and Bahadori-Nezhad, R.}, title = {How to Design a 9-11 GHz Balanced Low Noise Amplifier using HJFET Transistor}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {93-105}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {Balanced amplifiers, using two quadrature couplers in their structures, are usually used in microwave integrated circuits for high power or low noise and wide-band applications. For an instance, the balanced amplifiers are appropriate for transmitters/receivers of large phased array radars used in air and space radar systems. In this paper, several microwave power combiners/dividers such as Lange coupler, Wilkinson power divider and branch-line coupler are used to design and simulate a balanced low noise amplifier (LNA) and then the results are compared with single-ended low noise amplifier. The balanced low noise amplifier with two-stage Wilkinson power divider/combiner is preferred to other circuits regarding to noise figure, frequency bandwidth, stability and easy implementation. The measurement results of the fabricated balanced LNA show that the gain is 12 dB with the flatness of ±0.5 dB over the frequency range of 9-11 GHz. In addition, the input and output return losses are more than 15 dB and 10 dB, respectively. The noise figure, measured by Y-factor method, is 1.3 dB at 10 GHz.}, keywords = {Balanced LNA,Wilkinson power divider,branch-line coupler,Lange coupler}, title_fa = {نحوه طراحی و ساخت یک تقویت‌کننده متوازن کم‌نویز مبتنی بر ترانزیستور HJFET در باند فرکانسی GHz 11-9}, abstract_fa = {تقویت‌کننده‌های متوازن که طبقات آن با دو تزویج‌کننده متعامد به هم متصل شده‌اند معمولاً در مدارات مجتمع مایکروویو برای اجزاء توان بالا و پهن‌باند استفاده می‌شود. از کاربردهای مهم تقویت‌کننده متوازن در فرستنده/گیرنده رادارهای آرایه-فازی با تعداد زیاد است که موردنیاز سامانه‌های راداری هوافضا است و تقویت‌کننده متوازن مطلوب‌ترین گزینه برای به‌دست آوردن اهداف پیش‌بینی‌شده است. در تحقیق حاضر، چندین ترکیب‌کننده/مقسم توان مایکروویوی از قبیل تزویج‌کننده لنج، تزویج‌کننده ویلکینسون و تزویج‌کننده شاخه- خط و همچنین تقویت‌کننده کم‌نویز متوازن با استفاده از این تزویج‌کننده‌ها در بازه فرکانسی 9 تا 11 گیگاهرتز طراحی و شبیه‌سازی شده است و نتایج آن‌ها با تقویت‌کننده کم‌نویز تک‌خروجی مقایسه شده است. از میان تقویت‌کننده‌های طراحی‌شده تقویت‌کننده متوازن با تزویج‌کننده ویلکینسون دوطبقه به‌عنوان طرح نهایی انتخاب و ساخته شده است، که تقویت‌کننده ساخته‌شده در بازه فرکانسی مذکور دارای بهره‌ای صاف 12 دسی‌بل با تغییرات 0.5± دسی‌بل و میزان تلفات بازگشتی در ورودی و خروجی به ترتیب، بیش‌تر از 15 دسی‌بل و 10 دسی‌بل می‌باشد. به‌علاوه، عدد نویز تقویت‌کننده در فرکانس 10 گیگاهرتز 1.3 دسی‌بل با روش فاکتور Y اندازه‌گیری شده است.}, keywords_fa = {تقویت‌کننده متوازن,تزویج‌کننده لنج,تزویج‌کننده ویلکینسون,تزویج‌کننده شاخه-خط}, url = {https://tjee.tabrizu.ac.ir/article_5295.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5295_e6856b6d25674053db920354571ec2f9.pdf} } @article { author = {Salimi, M. and Pornadem, M.}, title = {A Novel DC-DC Boost Converter Based on Switched-Inductor / Switched-Capacitor with Very High Voltage Gain}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {107-121}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {In this paper, a novel transformerless DC-DC boost converter with very high voltage gain is proposed. By modular extension of the proposed structure, more improvements can be obtained in converter voltage gain and switch stress. The developed converter is designed using switched inductor/capacitor circuits and all of the switches are controlled by a single pulse width modulation (PWM) unit. In the presented topology, inductors current and capacitors voltage are equal during different transient and steady-state conditions. For this reason, in the closed-loop control of the proposed chopper, multiple voltage and current sensors are not required for measurement of the state variables. Also, performance of the proposed converter is compared with similar circuits which are reported in recent years. Experimental response of the proposed converter is investigated in both Continuous (CCM) and Discontinuous Conduction Modes (DCM) of operation. The experiment results are provided to verify the theoretical analysis. Finally, using a standard linear double-loop controller, closed-loop response of the developed converter is regulated under load and input voltage changes. It is shown that a unique current feedback is enough for regulation of the converter output voltage.}, keywords = {Maximum voltage gain,modular extension,switched-inductor,switched-capacitor,state variables}, title_fa = {مبدل DC-DC افزاینده جدید مبتنی بر کلیدزنی سلفی/خازنی با بهره ولتاژ بسیار بالا}, abstract_fa = {در این مقاله ساختار جدیدی از مبدل‌های DC به DC بدون ترانسفورمرِ متقارن به‌منظور افزایش بهره ولتاژ آن ارائه شده است. می‌توان با توسعه ماژولار سیستم پیشنهادی، حداکثر بهره ولتاژ مبدل و همچنین تنش کلیدهای قدرت را به‌دلخواه تنظیم نمود. ساختار ارائه‌شده مبتنی بر مدارات خازن/سلف کلیدزنی‌شونده بوده و به‌گونه‌ای طرح شده است که همه کلیدهای مبدل توسط یک مدار مدولاسیون پهنای باند (PWM) کنترل می‌شوند. جریان کلیه سلف‌ها و ولتاژ خازن‌های کلیدزنی‌شونده مدار در حالت دائمی و گذرا برابر است. به‌همین دلیل در کنترل حلقه بسته مبدل، نیازی به کاربرد سنسورهای متعدد ولتاژ و جریان برای اندازه‌گیری همه متغیرهای حالت نمی‌باشد. همچنین کارایی مبدل پیشنهادی با مدارات مشابه موجود به‌طور نسبتاً جامعی مقایسه شده است. در پایان، ضمن پیاده‌سازی عملی مبدل پیشنهادی، عملکرد آن در مدهای کاری پیوسته و ناپیوسته جریان سلف آزمایش شده است. نتایج عملی درستی تحلیل‌های تئوریک ارائه‌شده را اثبات می‌کند. بالاخره، با در نظر گرفتن یک کنترل‌کننده خطی دوحلقه‌ای، پاسخ حلقه بسته مبدل تحت تغییرات مقاومت بار و ولتاژ ورودی مطالعه می‌شود. نتایج شبیه‌سازی و آزمایشگاهی به‌دست‌آمده نشان می‌دهد که می‌توان فقط با استفاده از فیدبک جریان یکی از سلف‌های کلیدزنی‌شونده در حلقه کنترلی خروجی، ولتاژ مبدل را به‌طور پایداری تنظیم نمود.}, keywords_fa = {حداکثر بهره ولتاژ,توسعه ماژولار,سلف کلیدزنی‌شونده,خازن کلیدزنی‌شونده,متغیرهای حالت}, url = {https://tjee.tabrizu.ac.ir/article_5312.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5312_fda5521024ae8faa943ae4b6c1a067b3.pdf} } @article { author = {Shakarami, M. R. and Tarhani, M. and Rokrok, E.}, title = {Optimal Location and Sizing of Distributed Generation Resources and Capacitors Simultaneously in Distribution Systems considering Multi-level Voltage Dependent Load Model}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {123-139}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {In this paper, an optimization method is proposed to determine the optimal placement and size of Distributed Generation (DG) resources and capacitors simultaneously in radial distribution systems. Improvement of active and reactive power losses, voltage deviation, line load balancing and voltage stability indices of the network are objectives of this optimization problem. A multi-objective function with appropriate constraints has been proposed. In order to robust the location of DGs and capacitors against load variations, different load levels have been incorporated into the objective function simultaneously, while the generated power of DGs and reactive power of capacitors are assumed to be variable for each load level. In this study, light, nominal and heavy load levels have been considered for network. Also, the loads are considered to be voltage dependent. The optimization problem has been solved by TLBO algorithm. The proposed method has been implemented on the 33 and 69 bus radial distribution standard systems and the results have been compared with the methods based on single-level and loss sensitivity factor. The obtained results show superiority of the proposed method.}, keywords = {DG location,distribution system,voltage stability,loss reduction,capacitor location,load model,TLBO algorithm}, title_fa = {مکان‌یابی و تعیین ظرفیت بهینه منابع تولید پراکنده و خازن‌ها به‌طور همزمان در سیستم‌های توزیع با در نظر گرفتن مدل بار چندسطحی و وابسته به ولتاژ}, abstract_fa = {در این مقاله، یک روش بهینه‌سازی برای مکان‌یابی و تعیین ظرفیت بهینه منابع تولید پراکنده (DGs) و خازن‌ها به‌طور همزمان در سیستم‌های توزیع شعاعی ارائه شده است. اهداف این مسئله بهینه‌سازی، بهبود شاخص‌های تلفات توان اکتیو، تلفات توان راکتیو، انحراف ولتاژ، توازن ظرفیت بارگذاری خطوط و پایداری ولتاژ شبکه هستند. یک تابع هدف چندمنظوره همراه با قیود و محدودیت‌های لازم ارائه شده است. جهت مقاوم نمودن مکان DGها و خازن‌ها در برابر تغییرات بار، در تابع هدف پیشنهادی سطوح بارگذاری مختلف به‌طور همزمان در نظر گرفته شده، درحالی‌که میزان تولید DGها و توان راکتیو خازن‌ها برای هر سطح بارگذاری متغیر فرض شده است. در این تحقیق، سطوح بارگذاری سبک، نامی و سنگین برای شبکه در نظر گرفته شده است. همچنین، بارها به‌صورت وابسته به ولتاژ در نظر گرفته شده‌اند. برای حل مسئله بهینه‌سازی، از الگوریتم TLBO استفاده شده است. روش ارائه‌شده روی سیستم‌های توزیع ۳۳ و ۶۹ شینه استاندارد اجرا شده و نتایج آن با روش‌های تک‌سطحی و ضریب حساسیت تلفات مقایسه شده است. نتایج حاصله برتری روش پیشنهادی را نشان می‌دهند.}, keywords_fa = {مکان‌یابی DG,سیستم توزیع,پایداری ولتاژ,کاهش تلفات,مکان‌یابی خازن,مدل بار,الگوریتم TLBO}, url = {https://tjee.tabrizu.ac.ir/article_5306.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5306_6be9e62eebba504970f20c244c2eb536.pdf} } @article { author = {Saberi Noughabi, A. and Badrsimaei, H. and Farshad, M.}, title = {A Probabilistic Method to Determine the Optimal Setting of Combined Overcurrent Relays considering Uncertainties}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {141-153}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {In this paper, a new method is presented to determine the optimal settings of instantaneous unit and delay unit of combined overcurrent relay using probabilistic modeling of uncertainties. The uncertainties such as measurement error, operating conditions of system and fault conditions, are modelled probabilistically and use the Monte-Carlo method to determine the interval fault current passing through the relays. Two probabilistic sensitivity and selectivity indexes are defined for instantaneous unit of relay and the problem of determine the optimal setting of instantaneous unit is formulated as an optimization problem. The objective function of this problem is maximize the probabilistic sensitivity index and the complete selectivity is as constraint. Then, an interval method is used to solve this optimization problem and determine the optimal settings of instantaneous unit of relays. Also, using probabilistic modeling of uncertainties, the problem of determine the optimal settings of delay unit is formulated as an optimization problem and a hybrid Genetic Algorithm-Monte Carlo method has been used to solve it. The numerical results in two 8-bus and 14-bus IEEE test system showed that if using the proposed method, the more area of line is protected instantaneously and the remaining line has been protected by delay unit in minimum possible time and with complete selectivity.}, keywords = {Combined overcurrent relay,genetic-monte carlo algorithm,optimal setting,selectivity,sensitivity,uncertainty}, title_fa = {یک روش احتمالی به‌منظور تنظیم بهینه رله‌های اضافه جریان ترکیبی با در نظر گرفتن عدم‌قطعیت‌ها}, abstract_fa = {در این مقاله یک روش جدید به‌منظور تعیین تنظیم بهینه واحد آنی و واحد تأخیری رله اضافه جریان ترکیبی با مدل‌سازی احتمالی عدم‌قطعیت‌ها ارائه گردیده است. عدم‌قطعیت‌های خطای اندازه‌گیری، شرایط بهره‌برداری سیستم و شرایط وقوع خطا به‌صورت احتمالی مدل گردیده و از روش مونت‌کارلو برای محاسبه بازه جریان خطای عبوری از رله‌ها استفاده شده است. برای واحد آنی رله دو شاخص احتمالی حساسیت و انتخاب‌گری تعریف گردیده و مسئله تعیین تنظیم بهینه واحد آنی رله به‌صورت یک مسئله بهینه‌سازی تعریف گردیده است. تابع هدف این مسئله حداکثر کردن شاخص احتمال حساسیت و قید آن برقراری انتخاب‌گری کامل است. سپس از یک روش بازه‌ای برای حل این مسئله بهینه‌سازی و تعیین تنظیمات بهینه بخش تأخیری رله‌ها استفاده شده است. همچنین مسئله تعیین تنظیم بهینه واحد تأخیری رله نیز با مدل‌سازی احتمالی عدم‌قطعیت‌ها به‌صورت یک مسئله بهینه‌سازی فرمول‌بندی گردیده و از یک روش ترکیبی ژنتیک-مونت‌کارلو برای حل آن استفاده شده است. نتایج عددی در دو شبکه نمونه 8 شینه و 14 شینه IEEE نشان داد در صورت استفاده از روش پیشنهادی ناحیه بیشتری از طول خط به‌صورت آنی حفاظت گردیده و باقی‌مانده خط توسط واحد تأخیری در حداقل زمان ممکن و با انتخاب‌گری کامل حفاظت خواهد گردید.}, keywords_fa = {الگوریتم مونت‌کارلو-ژنتیک,انتخاب‌گری,تنظیم بهینه,حساسیت,رله اضافه جریان ترکیبی,عدم‌قطعیت}, url = {https://tjee.tabrizu.ac.ir/article_5294.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5294_7431a509f0c7dca1d895b8acc22568db.pdf} } @article { author = {Salehi, A. and Feshki Farahani, H. and Asadi, M.}, title = {Design and Constructing of STATCOM Based on GPI Controller}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {155-169}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {This paper is proposed a generalized proportional integrator (GPI) controller for static synchronous compensator (STATCOM) based on instantaneously reactive power (IRP) theory. For this purpose, at first the reference current of each phase is calculated using the related equation and then the switching signals are generated based on GPI controller. Designing of controller parameters is done based on system transfer function and gain margin in the frequency domain. Also, this paper is proposed the selecting of GPI coefficient to compensate the output current sensors delay and steady state gain variation. In the other parts of this paper, a STATCOM is designed and is simulated based on proposed controller. In these simulations, the capability of STATCOM is studied in different conditions such as inductive and capacitive load. Furthermore, the effect of load variation is investigated and the controller capability is evaluated. Finally, a 10KVA laboratory prototype was designed and fabricated and real test results was compared with simulation results.}, keywords = {Reactive power compensation,static synchronous compensator (STATCOM),instantaneously reactive power theory,proportional integral (PI) controller and generalized PI (GPI)}, title_fa = {طراحی و ساخت یک STATCOM بر مبنای سیستم کنترلی GPI}, abstract_fa = {در این مقاله یک کنترل‌کننده PI تعمیم‌یافته یا GPI برای جبران‌سازهای سنکرون استاتیکی (STATCOM) بر مبنای تئوری توان راکتیو لحظه‌ای ارائه شده است. برای این منظور ابتدا مقادیر جریان‌های مرجع محاسبه شده و سپس با استفاده از این جریان‌ها و کنترل‌کننده GPI، سیگنال‌های فرمان مناسب تولید می‌شود. طراحی پارامترهای کنترل‌کننده GPI با توجه به تابع تبدیل سیستم و بر مبنای حاشیه پایداری در حوزه فرکانس صورت گرفته است و نحوه انتخاب مناسب ضرایب کنترل‌کننده GPI برای مقاوم بودن در برابر تغییرات بهره حالت ماندگار و تأخیر سنسورهای جریان ارائه شده است. در بخش دیگری از این مقاله یک نمونه STATCOM طراحی و با استفاده از روش مذکور شبیه‌سازی شده است. در این شبیه‌سازی‌ها، نحوه تزریق توان راکتیو جهت جبران‌سازی برای سه حالت بار پس‌فاز، پیش‌فاز و همچنین تغییرات پله‌ای بار بررسی شده است و قابلیت کنترل‌کننده پیشنهادی مورد ارزیابی قرار گرفته است. درنهایت با استفاده از طراحی و ساخت یک نمونه آزمایشگاهی با توان نامی KVA 10، نتایج به‌دست‌آمده با نتایج شبیه‌سازی مورد مقایسه قرار گرفته است.}, keywords_fa = {جبران‌سازی توان راکتیو,جبران‌ساز سنکرون استاتیکی,تئوری توان راکتیو لحظه‌ای و کنترل‌کننده PI تعمیم‌یافته (GPI)}, url = {https://tjee.tabrizu.ac.ir/article_5316.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5316_d1e5f92494e06e40a2602ae6a50e39a5.pdf} } @article { author = {Arab Khaburi, D. and Sarajian, A. and Abbaszadeh, A.}, title = {Sensorless Predictive Torque Control of Permanent Magnet Assisted Synchronous Reluctance Machine}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {171-182}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {The Permanent Magnet-Assisted Synchronous Reluctance Machines (PMA-SynRM) drive has become one of the most interesting replacements for the high efficiency variable speed drive. Herein, sensorless predictive torque control of PMA-SynRM with nonsinusoidial back electromotive force (EMF) is introduced. In order to control PMA-SynRM, finite control set-model predictive control (FCS-MPC) is implemented by means of the two-level inverter. Besides, the improvement of FCS-MPC, improve Direct mean torque control (DMTC), is utilized as a second method to control PMA-SynRM. Models including Extended Kalman Filter (EKF), Adaptive Filter (AF) and quadrature Phase-Locked Loop (PLL) are used to address estimating of back EMF, the elimination of the high order harmonics, and the accurate estimation of position and speed rotor, respectively. The simulations in nominal and low speed conditions result in effectively minimizing torque ripples compared to conventional FCS-MPC. The outcomes of the observer simulation are successfully guaranteed the accurateness of speed and rotor position.}, keywords = {Permanent magnet-assisted synchronous reluctance motor,extended kalman filter,adaptive filter,predictive torque control,direct mean torque control}, title_fa = {کنترل پیش‌بین گشتاور بدون حسگر ماشین سنکرون رلوکتانسی مجهزشده با آهن‌ربای دائم}, abstract_fa = {در این مقاله، کنترل پیش‌بین بدون حسگر ماشین سنکرون رلوکتانسی مجهزشده با آهن‌ربای دائم ارائه شده است. ماشین‌های سنکرون رلوکتانسی مجهزشده با آهن‌ربای دائم به‌علت دارا بودن ناحیه عملکردی وسیع و ضریب توان بالاتر، در درایوهای سرعت متغیر با بازده بالا استفاده می‌شوند. برای کنترل این ماشین که دارای ولتاژ القایی غیرسینوسی نیز است، روش‌های بدون حسگر سرعت مبتنی بر کنترل پیش‌بین گشتاور در نظر گرفته شده است. روش مورداستفاده اول، روش کنترل پیش‌بین مدل مبنا با ورودی معدود و روش دوم، ترکیب روش کنترل پیش‌بین مدل مبنا با ورودی معدود و کنترل مستقیم گشتاور متوسط بهبودیافته است. به‌منظور رؤیت پارامترهای ماشین، از فیلتر کالمن توسعه‌یافته برای تخمین ولتاژ القایی و از ترکیب فیلتر تطبیقی و حلقه فاز قفل‌شده برای حذف هارمونیک‌های ولتاژ القایی و تخمین سرعت و موقعیت روتور استفاده می‌شود. نتایج شبیه‌سازی‌ها در سرعت نامی و سرعت پایین، بیانگر کاهش ضربان گشتاور روش ارائه‌شده نسبت به روش کنترل پیش‌بین معمولی است. همچنین عملکرد دقیق و مناسب رؤیت‌گر نیز در تخمین ولتاژ القایی، سرعت و موقعیت روتور، عملکرد صحیح ماشین را تضمین می‌نماید.}, keywords_fa = {ماشین سنکرون رلوکتانسی مجهزشده با آهن‌ربای دائم,فیلتر کالمن توسعه‌یافته,فیلتر تطبیقی,کنترل پیش‌بین گشتاور,کنترل مستقیم گشتاور متوسط}, url = {https://tjee.tabrizu.ac.ir/article_5309.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5309_4698adc0d4db31837fd599037b2703a5.pdf} } @article { author = {Alighardashi, F. and Zare Chahooki, M. A.}, title = {The Effectiveness of the Combination of Filter and Wrapper Feature Selection Methods to Improve Software Fault Prediction}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {183-195}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {Improving the software product quality before releasing by periodic tests is one of the most expensive activities in software projects. Due to limited resources to test modules in software projects, it is important to identify fault-prone modules and use the test sources for fault prediction in these modules. Software fault predictors based on machine learning algorithms, are effective tools for identifying fault-prone modules. Extensive studies are being done in this field to find the connection between features of software modules, and fault-prone have been done. Some of these features in predictive algorithms are like that not only did not improve the accuracy of the learning process, but also will be reduced the accuracy. In this study, due to the excellent performance of Forward Feature Selection (FS) method for effective selection of features, the initial subset of this method has been selected by using of combination of high ranking features in different Filter methods. The proposed method causes increment the speed of the convergence of feature selection as well as the accuracy improvement. The obtained results on NASA dataset with AUC criteria, indicates the effectiveness of this method in the improvement of the accuracy and the speed of software fault prediction.}, keywords = {Software fault prediction,machine learning,feature selection,Filter,wrapper}, title_fa = {تأثیر ترکیب روش‌های انتخاب ویژگی فیلتر و بسته‌بندی در بهبود پیش‌بینی اشکال نرم‌افزار}, abstract_fa = {حفظ کیفیت محصول نرم‌افزاری با آزمون‌های دوره‌ای قبل از نصب، یکی از پرهزینه‌ترین فعالیت‌ها در پروژه‌های فناوری اطلاعات است. با توجه به منابع محدود برای آزمون ماژول‌ها در پروژه‌های نرم‌افزاری، بهتر است ابتدا ماژول‌های مستعد اشکال شناسایی شوند و منابع آزمون در جهت شناسایی اشکال در این ماژول‌ها متمرکز گردند. پیش‌بینی‌کننده‌های اشکال مبتنی بر الگوریتم‌های یادگیری ماشین، ابزارهای مقرون‌به‌صرفه‌ای برای شناسایی ماژول‌های مستعد اشکال هستند. پژوهش‌های گسترده‌ای در این حوزه برای یافتن ارتباط بین ویژگی‌های ماژول‌های نرم‌افزاری و مستعد اشکال بودن آن‌ها صورت پذیرفته است. برخی از این ویژگی‌ها در الگوریتم‌های پیش‌بینی‌کننده به‌گونه‌ای هستند که نه‌تنها سبب بهبود دقت در فرآیند یادگیری نمی‌شوند بلکه کاهش دقت را نیز در پی خواهند داشت. در این پژوهش با توجه به عملکرد خوب روش انتخاب ویژگی روبه‌جلو در انتخاب ویژگی‌های مؤثر، زیرمجموعه اولیه در این روش با استفاده از تلفیق ویژگی‌های با رتبه بالا در روش‌های مختلف فیلتر انتخاب می‌شود. روش پیشنهادی علاوه‌بر بهبود دقت سبب افزایش سرعت همگرایی در انتخاب ویژگی می‌شود. نتایج حاصل از پیاده‌سازی و ارزیابی نتایج تجربی به‌دست‌آمده در دادگان ناسا با معیار AUC، بیانگر مؤثر بودن روش پیشنهادی در بهبود دقت و سرعت پیش‌بینی ماژول‌های نرم‌افزاری مستعد اشکال است.}, keywords_fa = {پیش‌بینی اشکال نرم‌افزار,یادگیری ماشین,انتخاب ویژگی,فیلتر,بسته‌بندی}, url = {https://tjee.tabrizu.ac.ir/article_5317.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5317_2e87b5a602afdea56c8e2d2c14f474d1.pdf} } @article { author = {Gholizadeh Soteh, A. and Khaleghi Bizaki, H.}, title = {Parameter Estimation of Binary BCH Code in Noisy Case using the Parity-Check Bits-based Method}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {197-209}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {This paper studies the problem of binary BCH code parameters estimation in noisy scenario. Despite the importance of this issue in such areas as the design of cognitive radio receiver, so far just a few methods have been proposed to solve it. All these methods are based on the BCH code generator polynomials roots and factors, and hence, are effective only in the very low noise. This paper proposes a new effective algebraic method to identify the BCH code parameters. In this method, the parameter estimation is performed based on the test of a few BCH codes. For each of these codes, the parity check bits are generated again by the message bits, and then compared with the parity check bits of received code word. The Decision criterion is the number of differences between the parity check bits. To do this, the number of unequal bits should be compared with a threshold. In this paper, we analytically compute the probability distribution of unequal parity check bits number and then propose an appropriate threshold. The simulation results show that the performance of proposed method is much higher than the previous methods.}, keywords = {BCH code,algebraic method,parity check bits,cognitive radio system,threshold test,primitive polynomial}, title_fa = {تخمین پارامترهای کد BCH باینری در شرایط نویزی با استفاده از روش مبتنی بر بیت‌های بررسی توازن}, abstract_fa = {این مقاله به مسئله تخمین پارامترهای کد BCH باینری در شرایط نویزی می‌پردازد. علی‌رغم اهمیت حل این مسئله در زمینه‌هایی مانند طراحی گیرنده‌های رادیو-شناختی، تاکنون تنها چند روش معدود برای آن پیشنهاد شده‌اند. تمام این روش‌ها مبتنی بر ریشه و عامل‌های چندجمله‌ای مولد کد BCH بوده و تنها در نرخ‌های خطای بسیار پایین کارایی دارند. در این مقاله یک روش جبری جدید و مؤثر برای تخمین پارامترهای کد BCH پیشنهاد می‌شود. تخمین پارامترها در این روش تنها بر مبنای آزمایش تعدادی معدودی از کدهای BCH انجام می‌شود. برای هرکدام از این کدها، بیت‌های بررسی توازن مجدداً توسط بیت‌های پیام تولید شده و با بیت‌های بررسی توازن کلمه کد دریافتی مقایسه می‌شوند. معیار تصمیم‌گیری در مورد صحت و یا عدم صحت کد موردآزمایش، تعداد اختلاف بین بیت‌های بررسی توازن است. این تعداد بعد از محاسبه باید با یک حد آستانه مقایسه شود. در این مقاله توزیع احتمال متناظر با این تعداد به‌صورت کاملاً تحلیلی محاسبه شده و سپس یک حد آستانه مناسب بر مبنای آن پیشنهاد می‌شود. نتایج شبیه‌سازی نشان می‌دهند که کارایی روش پیشنهادشده در این مقاله به‌مراتب بیشتر از روش‌های قبلی است.}, keywords_fa = {کد BCH باینری,روش جبری,بیت‌های بررسی توازن,سیستم رادیو-شناختی,آزمایش حد آستانه,چندجمله‌ای اولیه}, url = {https://tjee.tabrizu.ac.ir/article_5305.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5305_4fd86521eeab71cb03fc77f05de087b6.pdf} } @article { author = {Kakavand Mirzaeei, M. and Seifali Harsini, J.}, title = {A Game-theoretic Approach to Defensive Mechanism Design for Physical Layer Security: Application to Vehicular Ad-Hoc Networks}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {211-220}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {In the recent years the growth of wireless communications technology and its application in the development of new data services creates new challenges in the research field of data communications and networking. For example, in the field of intelligent transport systems, the concept of vehicular ad-hoc networking is presented. Because of the broadcast nature of radio environment, there are always opportunities for the network attackers to affect wireless communications systems. Hence, the issue of security for the transmission of sensitive data is of great importance. In the physical layer of the network, the attack may occur in the form of signal jamming or eavesdropping. In this paper, a defensive mechanism is designed using transmitter power control to reduce the damaging effects of these two physical layer attacks. Using a game-theoretic formulation, the mechanism optimizes OFDM subcarrier powers at both the main data transmitter and the attacker in order to improve the security of the communication channel (secrecy capacity). As an application of the proposed method, simulation results are provided for a vehicular ad-hoc network (VANET) scenario based on the IEEE802.11p standard.}, keywords = {Physical-layer security,games theory,Power Control,vehicular ad-hoc networks (VANETs)}, title_fa = {طراحی یک مکانیسم تدافعی برای بهبود امنیت در لایه فیزیکی با رویکرد نظریه بازی‌ها: کاربرد در شبکه‌های اقتضایی خودرویی}, abstract_fa = {در سال‌های اخیر رشد روزافزون تکنولوژی ارتباطات بی‌سیم و کاربرد آن در توسعه سرویس‌های داده جدید، چالش‌های جدیدی را در حوزه ارتباطات و شبکه‌های داده پیش روی محققان قرار داده است. به‌عنوان‌مثال در حوزه سیستم‌های حمل‌ونقل هوشمند ایده به‌کارگیری شبکه‌های اقتضایی خودرویی ارائه شده است. در این شبکه‌ها به‌جهت ماهیت پخش رادیویی، همیشه برای مهاجمان شبکه فرصت تأثیرگذاری روی سیستم ارتباطی وجود دارد. بنابراین مسئله امنیت برای ارسال اطلاعات حساس، بسیار مهم خواهد بود. در لایه فیزیکی شبکه، حمله‌های مهاجمان می‌تواند به یکی از دو شیوه ایجاد تداخل (پخش پارازیت) و شنود کردن صورت پذیرد. در این مقاله، یک مکانیسم تدافعی بر اساس کنترل توان فرستنده جهت مقابله با اثرهای تخریبی حمله‌های لایه فیزیکی (کنترل عملکرد مهاجم) طراحی شده است. در این مکانیسم با استفاده از روش نظریه بازی‌ها توان به‌کارگیری‌شده جهت انتقال اطلاعات توسط فرستنده و مهاجم روی زیرکانال‌های تقسیم فرکانسی متعامد یک کانال پهن باند به‌نحوی بهینه‌سازی شده است که به بهبود امنیت کانال (ظرفیت ایمن) منجر شود. شبیه‌سازی عملکرد الگوریتم ارائه‌شده در بستر یک شبکه اقتضایی خودرویی بر اساس استاندارد IEEE 802.11p انجام شده است.}, keywords_fa = {امنیت در لایه فیزیکی,نظریه بازی‌ها,کنترل توان,شبکه‌های اقتضایی خودرویی}, url = {https://tjee.tabrizu.ac.ir/article_5293.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5293_1b8653557c7ebc3cd3af74c19bf6c6ea.pdf} } @article { author = {Karami, M. A. and Ansarian, M. and Aghli-Moghaddam, S.}, title = {A Novel Ring Voltage Controlled Oscillator utilizing Miller Effect}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {221-228}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {In this paper, a novel ring voltage controlled oscillator (VCO) is presented. Miller effect is used for changing capacitance of the base delay cell of oscillator. The simulation results show better linearity and reduction in phase noise. The VCO is designed and post layout simulated using 0.18 um Complementary Metal Oxide Semiconductor (CMOS) technology design kit. The proposed VCO is optimized for two different criteria of achieving minimum noise and achieving high frequency with maximum linearity. A phase noise of -125 dBc/Hz at center frequency of 314 MHz is achieved for the low noise device and maximum nonlinearity error of 0.9% at center frequency of 3.89 GHz is achieved for the high frequency with maximum linearity device.}, keywords = {Ring oscillator,miller effect,phase noise}, title_fa = {نوسان‌ساز حلقوی جدید کنترل‌شده با ولتاژ با استفاده از اثر میلر}, abstract_fa = {در این مقاله، یک نوسان‌ساز حلقوی جدید کنترل‌شده با ولتاژ ارائه شده است. تغییر خازن سلول تأخیر پایه نوسان‌ساز، با به‌کارگیری اثر میلر انجام شده است. نتایج شبیه‌سازی نشان می‌دهد به‌کارگیری این اثر، سبب افزایش خطینگی و کاهش نویز فاز می‌شود. این نوسان‌ساز در فن‌آوری 0.18 میکرون سی‌ماس طراحی و طرح‌بندی آن شبیه‌سازی شده است. این نوسان‌ساز برای کاربرد در دو حالت دست‌یابی به کمترین نویز و دیگر برای دست‌یابی به فرکانس بالا با بیشترین خطینگی به‌صورت مجزا بهینه‌سازی شده است. در حالت کمترین نویز، نویز فاز dBc/Hz 125- در فرکانس مرکزی MHz 314 حاصل شده است. همچنین، در حالت فرکانس بالا با بیشترین خطینگی، حداکثر خطای خطینگی 0.9% در فرکانس مرکزی GHz 3.89 به‌دست آمده است.}, keywords_fa = {نوسان‌ساز حلقوی,اثر میلر,نویز فاز}, url = {https://tjee.tabrizu.ac.ir/article_5289.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5289_8322c015e9c0e4496e7e956eb0a210e3.pdf} } @article { author = {Karami, H. and Zaker, B. and Nasiri, M. and Tarimoradi, H. and Gharehpetian, G.}, title = {Optimal Placement of DGs and DSTATCOMs in order to Loss Reduction and Loadability Improvement}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {229-238}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {Increasing load demand in distribution system, needs extension of distribution system or restructure of network. All the changes in the distribution network, to respond load demand increasing, known as development of distribution system. Due to the development of distribution systems and increasing electricity demand, and in order to overcome the shortcomings of distribution systems such as high loss and low loadability, the use of distributed generation (DG) and FACTS devices such as DSTATCOMs are increasing. The placement of these devices is a significant factor affecting network loss reduction and improving network performance. In this paper, in order to achieve optimal places of DGs and DSTATCOMs, a new objective function is proposed and optimized based on the genetic algorithm (GA). The objective function includes system loadability and network loss. The proposed method is applied to the IEEE 33-bus and 69-bus test system and optimal places of DGs and DSTATCOMs are achieved by the proposed method. The results show the effectiveness of the proposed method to loadability improvement and loss reduction. As metaheuristic algorithms cannot exactly find optimal point in some problems, the results of this paper are near-optimal points for places of DGs and DSTATCOMs.}, keywords = {Distributed generation,DSTATCOM,losses,loadability,placement,objective function,GA}, title_fa = {مکان‌یابی بهینه DSTATCOMها و DGها به‌منظور کاهش تلفات و افزایش قابلیت بارپذیری}, abstract_fa = {امروزه به دلیل کاهش منابع سوخت فسیلی و همچنین افزایش آلاینده‌های محیطی، استفاده از منابع تولید پراکنده در شبکه‌های قدرت افزایش یافته است. از طرف دیگر افزایش تقاضای بار موجب بهره‌برداری از شبکه‌های توزیع فعال، نزدیک به محدودیت‌های آن نظیر توان عبوری از خطوط می‌شود. این امر سبب شده است تا علاوه بر استفاده از منابع تولید پراکنده، از عناصر DFACTS مانند DSTATCOM نیز استفاده شود. مکان نصب منابع تولید پراکنده و DSTATCOM بر عواملی چون تلفات و قابلیت بارپذیری شبکه، اثرگذار است. ازاین‌رو اگر مکان نصب یا قرارگیری این عناصر در شبکه، بهینه انتخاب نشود، ممکن است موجب اثرات نامطلوبی همچون افزایش تلفات شود. در این مقاله، به‌منظور کاهش و یا از بین بردن اثرات منفی اشاره‌شده، یک تابع هدف جدید ارائه شده تا بتوان به‌وسیله مینیمم کردن مقدار آن توسط الگوریتم ژنتیک، مکان‌های مناسب برای نصب DGها و DSTATCOMها را پیدا کرد. تابع هدف ارائه‌شده برای بهبود قابلیت بارپذیری شبکه و کاهش تلفات است. این روش جدید در دو شبکه 33 و 69 باسباره IEEE پیاده‌سازی شده و مکان‌های مناسب برای DGها و DSTATCOMها برای هر دو شبکه به‌دست آمد. نتایج بیانگر تأثیر مثبت روش ارائه‌شده، در بهبود بارپذیری سیستم و کاهش تلفات شبکه در این دو سیستم است. ازآنجاکه الگوریتم‌های فراابتکاری نقاط بهینه کلی دقیق را نمی‌دهند و فقط می‌توانند نزدیک به نقطه بهینه را بیابند، جواب‌های به‌دست‌آمده با استفاده از الگوریتم ژنتیک، جواب‌های نزدیک به نقطه بهینه هستند.}, keywords_fa = {منابع تولید پراکنده,DSTATCOM,تلفات,قابلیت بارپذیری,مکان‌یابی,تابع هدف,الگوریتم ژنتیک}, url = {https://tjee.tabrizu.ac.ir/article_5313.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5313_b1224c18c8296df399628be6ebaf46fb.pdf} } @article { author = {Karami-Mollaee, A. and Rajabi, E.}, title = {Dynamic Sliding Mode Control Design for Nonlinear Systems Using Sliding Mode Observer}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {239-248}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {In this paper, dynamic sliding mode control (DSMC) of nonlinear systems using sliding mode observer is proposed. In DSMC the chattering is removed due to the integrator (or a low pass filter) which is placed before the input control signal of the plant. However, in DSMC the augmented system (system plus the integrator) is one dimension bigger than the actual system (if the integrator is used) and then to stabilize the system, the plant model should be completely known. To solve this problem, we suggest a sliding mode observer to identify and to obtain a model for the uncertain nonlinear system and then, chattering free control signal is calculated to have desired properties. Stability of the proposed observer and controller is based on Lyapunov theorem and moreover the upper bound of the system dynamic is not used which is important in practical applications. To verify the proposed approach, Duffing-Holmes chaotic system with comparison to usual sliding mode control is used. To have a rightful comparison, we use from the same observer (the proposed sliding mode observer) in two methods. With comparison of the equations, we can see the simplicity of the usual SMC while one can also see the simple concepts of DSMC. Moreover, from equations and simulations, it is clear that in usual SMC chattering is available, while in DSMC chattering is removed completely.}, keywords = {Dynamic sliding mode control,sliding mode observer,nonlinear system,Duffing-Holmes chaotic system}, title_fa = {طراحی کنترل حالت لغزشی دینامیکی برای سیستم‌های آشوبی با استفاده از رؤیتگر حالت لغزشی}, abstract_fa = {در این مقاله روشی جدید برای کنترل حالت لغزشی دینامیکی سیستم‌های غیرخطی با استفاده از رؤیتگر حالت لغزشی پیشنهاد شده است. در کنترل حالت لغزشی دینامیکی با قرار دادن انتگرال‌گیر (یا فیلتر پایین‌گذر) قبل از سیگنال ورودی کنترل، لرزش حذف می‌شود.  با این حال، در کنترل حالت لغزشی دینامیکی مرتبه سیستم افزوده (سیستم با انتگرال‌گیر) یک واحد از مرتبه سیستم اصلی بیشتر است (در صورت استفاده از انتگرال‌گیر)، بنابراین برای پایدار سازی آن، مدل سیستم باید کامل مشخص باشد. برای حل این مشکل، با استفاده از رؤیتگر حالت لغزشی پیشنهادی، مدلی برای سیستم غیرخطی نامعین به‌دست آورده و سپس سیگنال کنترل ورودی بدون لرزش سیستم را براساس این رؤیتگر، محاسبه می‌نماییم. همگرایی کنترل‌کننده و رؤیتگر پیشنهادی، با قضیه لیاپانوف اثبات شده و به علاوه از کران مدل سیستم استفاده نمی‌شود که در کاربردهای عملی اهمیت دارد. برای تایید کارایی این روش، از سیستم آشوبی دافینگ هلمز به‌همراه مقایسه روش پیشنهادی با کنترل حالت لغزشی رایج استفاده می‌کنیم. در ارایه نتایج و برای این‌که مقایسه به‌صورت عادلانه باشد، در هر دو روش از یک رؤیتگر (رؤیتگر لغزشی پیشنهادی) استفاده می‌کنیم. با مطالعه و مقایسه معادلات بیان‌شده، تفاوت دو روش مشاهده شده و اگر چه کنترل حالت لغزشی رایج بسیار ساده است، ولی خواننده می‌تواند سادگی فهم و طراحی کنترل حالت لغزشی دینامیکی را نیز به‌وضوح مشاهده نماید.همچنین در نتایج حاصل و در شبیه‌سازی‌ها، دیده می‌شود که در کنترل حالت لغزشی رایج لرزش وجود دارد ولی در کنترل حالت لغزشی دینامیکی لرزش کامل حذف می‌شود.}, keywords_fa = {کنترل حالت لغزشی دینامیکی,رؤیتگر حالت لغزشی,سیستم غیرخطی,مدل آشوبی دافینگ هلمز}, url = {https://tjee.tabrizu.ac.ir/article_5304.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5304_1146c6054c190eb660b6495738f6fde5.pdf} } @article { author = {Kaabe Pahne Kolaei, S. and Rahimiyan, M.}, title = {Robust Optimization-based Energy Management of Virtual Power Plant by Monitoring Microgrid Contingencies: Single-Line Outage Case Study}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {249-261}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {In this paper, a robust optimization model is proposed for energy management of a Virtual Power Plant (VPP) including solar power stations, energy storage facilities and demands interconnected within a microgrid. In the robust optimization model, the uncertain parameters of solar power production and energy prices are modelled as confidence intervals. On the other hand, equipped with smart grid technology, the two-way communication between the energy management system and microgrid components, as well as between the energy management system and main grid is possible. The energy management system can make decisions while monitoring conditions of microgrid components and updating available information. Thus, the energy management system is informed about microgrid contingencies in real-time, and modifies its decisions related to power traded with the main grid, solar power production and power load shedding or shifting. The confidence intervals of energy price and solar energy production are forecasted based on real-world historical data collected from the New England electricity market, US. Impact of forecast accuracy, contingency occurrence and confidence level on the performance of the robust optimization model is investigated. Simulation results indicate good performance of the robust optimization model compared with a conventional deterministic method.}, keywords = {Energy management,Virtual power plant,Smart Grid,robust optimization,contingency}, title_fa = {مدیریت انرژی نیروگاه مجازی بر پایه بهینه‌سازی مقاوم با پایش پیشامدهای ریزشبکه: مطالعه موردی خروج تکی خط}, abstract_fa = {در این مقاله، یک مدل بهینه‌سازی مقاوم برای مدیریت انرژی نیروگاه مجازی شامل ایستگاه‌های خورشیدی، سیستم‌های ذخیره‌ساز و متقاضیان انرژی واقع در ریزشبکه برق ارائه می‌شود. در مدل بهینه‌سازی مقاوم، پارامترهای غیرقطعی قیمت انرژی و تولید توان خورشیدی به‌صورت بازه‌های اطمینان مدل‌سازی می‌شوند. از طرفی، با تجهیز ریزشبکه به فناوری شبکه هوشمند، امکان ارتباط دوسویه بین سیستم مدیریت انرژی و اجزای ریزشبکه و همچنین بین سیستم مدیریت انرژی و شبکه اصلی فراهم می‌شود. سیستم مدیریت انرژی با پایش وضعیت اجزای ریزشبکه و به‌روزرسانی اطلاعات مرتبط، تصمیم‌های مناسب را اتخاذ می‌کند. به‌این‌ترتیب، سیستم مدیریت انرژی به‌طور زمان-حقیقی از پیشامدهای ریزشبکه مانند خروج خطوط مطلع می‌گردد و تصمیم‌های اتخاذشده در ارتباط با تبادل با شبکه اصلی، تولید توان خورشیدی و قطع یا جابه‌جایی بار را اصلاح می‌کند. بازه‌های اطمینان قیمت انرژی الکتریکی و تولید توان خورشیدی بر اساس اطلاعات واقعی جمع‌آوری‌شده از بازار برق نیوانگلند آمریکا پیش‌بینی می‌شوند. اثر دقت پیش‌بینی، وقوع پیشامد و سطح اطمینان بر عملکرد مدل بهینه‌سازی مقاوم در یک ریزشبکه برق هوشمند بررسی می‌شود. نتایج شبیه‌سازی، عملکرد خوب مدل بهینه‌سازی مقاوم را در مقایسه با یک روش قطعی مرسوم آشکار می‌سازد.}, keywords_fa = {مدیریت انرژی,نیروگاه مجازی,شبکه هوشمند,بهینه‌سازی مقاوم,پیشامد}, url = {https://tjee.tabrizu.ac.ir/article_5314.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5314_8a6ace5e506bc38539ad3868930201da.pdf} } @article { author = {Mosavi, M. R. and Khishe, M. and Ebrahimi, E. and Mohamadzadeh, F.}, title = {Classification of Sonar Targets using Particle Swarm Optimization via Independent Groups}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {263-274}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {Due to the fact that sonar targets have high dimensions and local optimums, conventional classifiers do not have adequate ability to classify these targets. Using a combination of Particle Swarm Optimization (PSO) and Artificial Neural Networks (ANNs) is one of the solutions to overcome this problem. PSO has two drawbacks in high-dimensional datasets: being trapped in local minimums and slow convergence rate. To tackle these deficiencies, this paper uses a newly proposed meta-heuristic algorithm entitled Independent Group Particle Swarm Optimization (IGPSO). This algorithm is inspired by the diversity of individuals in the accumulation of birds or the swarm of insects. It has the unique ability to classify high-dimensional dataset (sonar). In order to test the capabilities of the IGPSO, the algorithm will be evaluated by 23 well-known test functions and the results are compared to PSO and improved versions of PSO. The results show that IGPSO is able to provide much better results in finding the global minimum of functions, convergence speed and local minima avoidance compared with other benchmark algorithms. The results show that the classifier which is designed with IGPSO classifies sonar dataset with accuracy about 96.67% while the accuracy of the PSO-classifier is about 92.33%.}, keywords = {Sonar,dataset,classification,PSO,IGPSO,Neural Networks}, title_fa = {دسته‌بندی اهداف سوناری توسط الگوریتم بهینه‌ساز ازدحام ذرات با گروه‌های مستقل}, abstract_fa = {با توجه به اینکه دادگان سوناری دارای ابعاد بالا و بهینه‌های محلی زیادی می‌باشند، دسته‌بندی‌کننده‌های متعارف توانایی دسته‌بندی مناسب این‌گونه اهداف را ندارند. استفاده از ترکیب بهینه‌ساز ازدحام ذرات (PSO) و شبکه‌های عصبی مصنوعی (ANN) یکی از راه‌حل‌هایی است که در چند سال اخیر برای غلبه بر این مشکل موردتوجه قرار گرفته است. در کاربرد دادگان با ابعاد بالا، الگوریتم PSO دارای دو مشکل به دام افتادن در کمینه‌های محلی و نرخ همگرایی آهسته می‌باشد. این مقاله به‌منظور غلبه بر این نقص و رسیدن به نرخ دسته‌بندی مناسب از یک روش فراابتکاری جدید به نام بهینه‌ساز ازدحام ذرات با گروه‌های مستقل (IGPSO) استفاده می‌کند. این الگوریتم با الهام‌گیری از تنوع افراد در تجمع پرندگان یا ازدحام حشرات، دارای توانایی‌های منحصربه‌فردی در دسته‌بندی دادگان ابعاد بالا (سونار) می‌باشد. در ابتدا توانایی‌های IGPSO در کار با دادگان ابعاد بالا توسط 23 تابع آزمون شناخته‌شده به‌خوبی ارزیابی شده و نتایج به‌دست‌آمده با روش PSO و نمونه‌های بهبودیافته PSO مقایسه می‌شوند. نتایج نشان می‌دهد که الگوریتم IGPSO قادر به ارائه نتایجی بسیار بهتر در یافتن کمینه کلی توابع، سرعت همگرایی و اجتناب از کمینه محلی در مقایسه با الگوریتم‌های معیار، مخصوصاً برای توابع با ابعاد بالا است. علاوه بر این، در این مقاله یک کاربرد واقعی از روش ارائه‌شده در زمینه دسته‌بندی دادگان سونار بیان می‌شود. نتایج حاصله نشان می‌دهد که دسته‌بندی‌کننده طراحی‌شده با IGPSO دادگان سونار را با دقت 96.67% دسته‌بندی می‌کند، این در حالی است که PSO دقت 92.33% را ارائه می‌نماید.}, keywords_fa = {IGPSO,سونار,دسته‌بندی,گروه‌های مستقل ذرات,شبکه‌های عصبی}, url = {https://tjee.tabrizu.ac.ir/article_5301.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5301_a2b1c442edd7336a0bcbebb673ee6f70.pdf} } @article { author = {Misaghi, F. and Barforoshi, T. and Jafari, M.}, title = {Distributed Generation Expansion Planning in Sub-Transmission Substations Considering Transmission Substations Expansions using a Novel Bi-level Model}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {275-286}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {In this paper, a novel framework is proposed to solve distributed generation (DG) expansion planning problem in sub-transmission substations considering expansions of transmission substation capacities in the presence of incentives. The prposed model includes both the firm contract and capacity payment as incentive options. A bi-level model is presented for the problem, where the upper level consists of optimal decision of investor through maximizing profit, while market clearing and substation expansion are considered in lower level. Due to existing of binary variable in the lower level problem and therefore its non-convexity, it is not possible to convert the bi-level problem in to a single level, so-called mathematical problem with equilibrium constraints (MPEC). Thus, an algorithm which gains the combination of enumeration and mathematical optimization is used to tackle with the non-convexity. In the proposed approach, according a few number of expansion strategies of substation upgrading, all strategies are considered and a MILP is solved for each strategy. The efficieancy of the proposed model is examined on a six-bus network and on a part of subtransmission network of MAZANDARAN regional electric company (MREC).}, keywords = {Mathematical program with equilibrium constraints,mixed integer linear programming,capacity payment,Distributed generation,firm contract,enumeration}, title_fa = {برنامه‌ریزی توسعه تولیدات پراکنده در پست‌های فوق‌توزیع با در نظر گرفتن توسعه پست‌های انتقال با استفاده از مدل دوسطحی جدید}, abstract_fa = {در این مقاله، چهارچوبی جدید برای حل مسئله برنامه‌ریزی توسعه منابع تولیدپراکنده (DG) در پست‌های فوق‌توزیع با در نظر گرفتن امکان توسعه ظرفیت پست‌های انتقال شبکه در حضور مشوق‌های سرمایه‌گذاری ارائه می‌شود. در مدل پیشنهادی، مشوق‌های سرمایه‌گذاری موردمطالعه قراردادهای تضمینی خرید برق و پرداخت‌های ظرفیت را شامل می‌شود. مسئله برنامه‌ریزی در قالب یک مدل دوسطحی ارائه می‌شود که سطح اول آن شامل بهینه‌سازی تصمیمات سرمایه‌گذار با هدف کسب سود حداکثر و سطح دوم شامل مسئله بهینه‌سازی تسویه بازار و تصمیم‌گیری در مورد توسعه پست انتقال بالادست است. به‌دلیل وجود متغیر باینری در مسئله سطح پایین و نامحدب بودن آن، تبدیل مسئله دوسطحی به یک مسئله برنامه‌ریزی ریاضی با قیود تعادل (MPEC) امکان‌پذیر نیست. لذا ترکیبی از الگوریتم یکایک‌شماری و بهینه‌سازی ریاضی استفاده می‌شود. در این روش، با توجه به محدود بودن تعداد گزینه‌های توسعه ظرفیت پست‌های انتقال، تمامی حالات ممکن توسعه به‌صورت یکایک شماری در نظر گرفته شده و برای هریک از ترکیب‌ها، مسئله MPEC تبدیل‌شده به یک مسئله برنامه‌ریزی خطی صحیح آمیخته (MILP)، حل می‌شود. کارایی چهارچوب پیشنهادی بر روی یک شبکه قدرت نمونه 6 شینه و شبکه فوق‌توزیع غرب استان مازندران با انجام شبیه‌سازی‌ها و تحلیل‌های لازم، مورد آزمون قرار می‌گیرد.}, keywords_fa = {برنامه‌ریزی ریاضی با قیود تعادل,برنامه‌ریزی خطی صحیح آمیخته,پرداخت ظرفیت,تولید پراکنده,قرارداد تضمینی,یکایک‌شماری}, url = {https://tjee.tabrizu.ac.ir/article_5297.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5297_68c542ed40e4ce5b12758f2f8cfa433d.pdf} } @article { author = {Namdari, F. and Salehi, M.}, title = {A High-Speed Protection Scheme for Transmission Lines using Mathematical Morphology}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {287-298}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {In this paper, a novel high-speed protection scheme, for transmission lines based on initial current traveling waves and employing mathematical morphology (MM) is presented. This scheme, by comparing polarity and arrival time of initial current traveling wave from two terminals of the protected line, can discriminate the fault direction and internal faults from external faults rapidly. A new MM filter to extract transient components from fault-induced transient signals is designed. This MM filter can fast and accurately detect the arrival time and polarity of traveling waves in all conditions. Extensive simulation studies using EMTP and MATLAB are performed to evaluate the validity and reliability of the proposed scheme. The simulation results show that the proposed protection scheme can fast and reliably discriminate the fault direction and the internal faults from external faults in the most of conditions, especially in high impedance fault and low inception angle fault situation. The protection performance is immune to fault resistances, fault inception angles, fault types and fault location.}, keywords = {Mathematical morphology,traveling waves,transmission lines protection,relay}, title_fa = {یک طرح حفاظتی خیلی سریع مبتنی بر امواج اولیه سیار جریان برای خطوط انتقال با استفاده از ریخت‌شناسی ریاضی}, abstract_fa = {در این مقاله، یک روش حفاطتی خیلی سریع برای خطوط انتقال با استفاده از تکنیک ریخت‌شناسی ریاضی (MM) ارائه شده است. روش پیشنهادی با استفاده از مقایسه پلاریته و زمان رسیدن امواج اولیه سیار جریان در هر دو طرف خط انتقال قادر است به‌راحتی جهت خطا، خطا در داخل و خارج خط انتقال را تشخیص دهد. برای پردازش سیگنال و استخراج مولفه‌های گذرا، یک فیلتر ریخت‌شناسی ریاضی (MMF) جدید به‌گونه‌ای طراحی شده است که قادر است با دقت و سرعت بالا پلاریته امواج سیار را در تمامی شرایط تشخیص دهد. برای ارزیابی عملکرد روش پیشنهادی، شبیه‌سازی‌های وسیعی با نرم‌افزار EMTP و MATLAB انجام شده است. نتایج حاصل از شبیه‌سازی نشان می‌دهند که روش پیشنهادی قادر است با قابلیت اطمینان، سرعت و دقت بالا  انواع خطا در داخل و خارج از خط انتقال و جهت آن‌ها را تشخیص دهد و عملکرد آن مستقل از امپدانس خطا، زاویه شروع خطا، نوع خطا و مکان خطا است.}, keywords_fa = {ریخت‌شناسی ریاضی,امواج سیار,حفاظت خط انتقال,رله}, url = {https://tjee.tabrizu.ac.ir/article_5315.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5315_43898a1a94b19b0fd48494fa53a0c63b.pdf} } @article { author = {Najafalizadeh, H. and Orouji, A. A.}, title = {Presenting Double Gate MOSFET Structure by using Double Material of HfO2 and SiGe in the Channel of Silicon (DM-DG)}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {299-304}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {In this paper, a new structure of the double gate transistor named DM-DG transistor is presented. In this structure by using HfO2 insulation in the border region of drain and channel, and using of silicon- germanium in the source region the structure is improved, comparing to conventional structures double gate (C-DG). HfO2 insulation area reduces the electric field in the channel and drain region significantly. Because of reducing hot carrier effects and reducing the effect of drain induced barrier lowering (DIBL), the destructive processes in this structure are lower than the conventional double gate structure. In order to avoiding gathering additional holes to the surface of the channel, and reduces the parasitic BJT transistor and floating body effect (FBE) in our structure, we use Silicon- germanium in the source region. In this article 2D simulation results have been shown using ATLAS software and because of the short length of the channel region (20 nm) quantum model has been used.}, keywords = {Double gate MOSFET,short channel effect,HfO2 insulation,SiGe}, title_fa = {طراحی ساختاری از ترانزیستور ماسفت دوگیتی با به‌کارگیری دو ماده، اکسید هافنیم (HfO2) و سیلیسیم-ژرمانیوم (SiGe) در کانالی از جنس سیلیسیم (DM-DG)}, abstract_fa = {در این مقاله ساختار جدیدی از ترانزیستور دوگیتی به نام ترانزیستور DM-DG ارائه‌شده است. در این ساختار با به کار بردن عایق HfO2 در مرز ناحیه کانال و درین و همین‌طور استفاده از سیلیسیم-ژرمانیوم در ناحیه سورس منجر به بهبود ساختار در مقایسه با ساختارهای متداول دوگیتی (C-DG) شده است. ناحیه عایق HfO2 به‌طور قابل‌توجهی میدان الکتریکی را در ناحیه کانال و درین کاهش می‌دهد؛ بنابراین فرآیندهای مخرب در ساختار ارائه‌شده نسبت به ساختار دوگیتی معمولی به دلیل کاهش اثر حامل‌های داغ (HCE) و همین‌طور اثر کاهش سد پتانسیل به دلیل درین (DIBL) پایین‌تر است. از طرفی برای این‌که تجمع حفره‌های اضافی را از سطح کانال دور کرده و باعث کاهش اثر بدنه شناور (FBE) و ترانزیستورهای BJT پارازیتیک در ساختار شویم، از سیلیسیم-ژرمانیوم در ناحیه سورس استفاده می‌کنیم. نتایج شبیه‌سازی دوبعدی با نرم‌افزار شبیه‌ساز ATLAS نشان داده‌شده و به دلیل کوچک بودن طول ناحیه کانال (20 nm) از مدل کوانتومی استفاده شده است.}, keywords_fa = {ماسفت دوگیتی,اثر کانال کوتاه,عایق HfO2,سیلیسیم-ژرمانیوم}, url = {https://tjee.tabrizu.ac.ir/article_5311.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5311_a7d5ed503372da329ef85919982c6fbf.pdf} } @article { author = {Nojavan Goltappeh, M. and Seyedi, H. and Mohammadi Ivatloo, B.}, title = {Assessment of Preventive Facilities against Voltage Instability Considering Power System Losses, Correlated Wind Turbine Uncertainty and Load Variations}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {305-318}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {This paper presents a comprehensive method for preventing voltage instability, considering load variation, power system losses and correlated wind turbines. The proposed method considers large interval for load variation and comprehensive assessment of preventive facilities versus load variation is performed. The proposed method is simulated on large scale IEEE 118-bus test system. The effect of uncertain correlated wind turbines, power system losses and demand response considering voltage stability margin, on preventive facilities is analyzed, too.}, keywords = {voltage stability,preventive facilities,losses,load variation,correlated wind turbines}, title_fa = {ارزیابی راهکارهای پیشگیری از ناپایداری ولتاژ با در نظر گرفتن تلفات، عدم قطعیت توربین‌های بادی همبسته به‌هم و تغییرات بار}, abstract_fa = {در این مقاله روشی برای ارزیابی کامل راهکارهای پیشگیری از ناپایداری ولتاژ با در نظر گرفتن تغییرات بار، تلفات شبکه و عدم قطعیت تولید توربین‌های بادی همبسته به‌هم ارائه شده است. محدوده وسیعی برای تغییر بار سیستم قدرت لحاظ شده و نحوه تغییر راهکارهای پیشگیرانه با تغییر بارگذاری سیستم موردبررسی قرار گرفته است. طرح ارائه‌شده روی شبکه مقیاس بزرگ استاندارد 118 باسه IEEE شبیه‌سازی شده است و تأثیر عواملی چون عدم قطعیت تولید توربین‌های بادی همبسته به‌هم، بهینه کردن تلفات شبکه به همراه حفظ حاشیه پایداری ولتاژ مطلوب سیستم بر نحوه تغییر راهکارهای پیشگیرانه مورد ارزیابی و تجزیه و تحلیل قرار گرفته است. تأثیر میزان مشارکت بارها بر هزینه راهکارهای پیشگیرانه، همچنین دستیابی به روندی از تمام راهکارها با تغییرات بار از دیگر موارد قابل‌توجه در این مقاله است.}, keywords_fa = {پایداری ولتاژ,راهکارهای پیشگیرانه,تلفات,تغییرات بار,توربین‌های بادی همبسته به‌هم}, url = {https://tjee.tabrizu.ac.ir/article_5300.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5300_26a9323ecd267f43b58609c7aaa3005b.pdf} } @article { author = {Niyazi, M. and Karimi, S. and Baniardalani, S.}, title = {Mixed H2/H∞ Robust Controller Design and Simultaneous use of Virtual Inertia for Stability Improvement of Micro-grids}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {319-328}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {In this paper, to improve the stability of a micro-grid in islanding mode, that contains two wind and gas DG units, simultaneous use of virtual inertia and robust controller is proposed. The use of the variable speed wind turbine and the Doubly-Fed Induction Generator (DFIG) reduces the system inertia and thereby decreases the dynamic stability. Implementation of virtual inertia in DFIG improves the power system stability. However, the change or uncertainty of the system parameters is a major challenge that must be considered when using the virtual inertia. In this paper, the implementation of virtual inertia in DFIG control system is described in detail and the impact of uncertainty and change of the control system parameters over performance of the frequency control system is investigated. In order to improve the dynamic and the steady state performance of the frequency control system, benefiting from the impact of virtual inertia, the mixed H2/H∞ robust controller is proposed. The simulation results using MATLAB show that the proposed hybrid controller guarantees the system stability in conditions of uncertainty and change of the control system parameters.}, keywords = {Virtual inertia,DFIG,uncertainties,Micro-grids,Robust Controllers,H2/H∞,Stability}, title_fa = {طراحی کنترل‌کننده مقاوم ترکیبی ∞H2/H و استفاده همزمان اینرسی مجازی به‌منظور بهبود پایداری ریزشبکه‌ها}, abstract_fa = {در این مقاله، به‌منظور بهبود پایداری یک ریزشبکه در حالت جزیره‌ای که شامل دو واحد تولید پراکنده بادی و گازی است، استفاده همزمان از اینرسی مجازی و کنترل‌کننده مقاوم پیشنهادشده است. به‌دلیل وجود توربین بادی سرعت متغیر و استفاده از ژنراتور القایی دوسوتغذیه، اینرسی سیستم و درنتیجه پایداری دینامیکی تضعیف می‌گردد. پیاده‌سازی و بهره‌گیری از اینرسی مجازی در ژنراتور القایی دوسوتغذیه، موجب بهبود پایداری سیستم قدرت می‌گردد. بااین‌وجود، عدم قطعیت و نامعینی برخی پارامترهای کنترلی، چالشی است که باید هنگام استفاده از اینرسی مجازی مدنظر قرار گیرد. در این مقاله، ضمن تشریح نحوه پیاده‌سازی اینرسی مجازی در سیستم کنترل ژنراتور القایی دوسو  تغذیه، تأثیر عدم قطعیت و نامعینی پارامترهای کنترلی بر عملکرد سیستم کنترل فرکانس بررسی‌شده است. به‌منظور بهبود عملکرد دینامیکی و ماندگار سیستم کنترل فرکانس، با بهره‌گیری از تأثیر اینرسی مجازی، کنترل‌کننده مقاوم ترکیبی  برای واحد تولید پراکنده گازی پیشنهادشده است. نتایج شبیه‌سازی با استفاده از نرم‌افزار MATLAB نشان می‌دهد که کنترل‌کننده ترکیبی پیشنهادی، پایداری سیستم را در شرایط عدم قطعیت و نامعینی پارامترهای کنترلی تضمین می‌کند.}, keywords_fa = {اینرسی مجازی,DFIG,نامعینی,ریزشبکه‌ها,کنترل‌کننده مقاوم,∞H2/H,پایداری}, url = {https://tjee.tabrizu.ac.ir/article_5299.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5299_ace9f31b7b832e6b85c7496c723158aa.pdf} } @article { author = {Nayeripour, M. and Fallahzadeh-Abarghouei, H. and Hasanvand, S.}, title = {Hierarchical and Distributed Voltage Management in Smart Grid with Distribution Generator Participation}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {329-343}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {The primary purpose of a distribution system is to meet the damands optimally as well as to maintain voltage within a specified range. Since renewable energy resources such as wind and solar energy have intermittent nature, they cause significant fluctuations in distribution system voltages. In conventional methods, tap changer transformers, voltage regulators and capacitor banks are used to control the voltage of distribution network, but these equipments are not proper to track rapid changes. The proposed method in this paper which is based on distributed generations with smart inverters, presents a distributed and hierarchical management approach to maintain the bus voltages within an allowable range. At first, the distribution system is devided to multiple areas and then voltage profile is managed in an optimal way by determining reactive power set point of generators for each area in two levels: real-time primary level and coordinated secondary level. The results on 34-bus test feeder under different load level show that the proposed voltage management scheme has high accuracy and reasonable computation time which makes it efficient approach for smart distribution grid with renewable resources.}, keywords = {Distributed management,voltage regulation,intermittent distributed energy resource,distribution system partitioning,sensitivity matrix,real-time primary control,coordinated secondary control,optimal power flow}, title_fa = {مدیریت توزیع‌شده و سلسله‌مراتبی ولتاژ در شبکه هوشمند با مشارکت مولدهای پراکنده}, abstract_fa = {در سیستم‌های توزیع قدرت علاوه بر بهره‌برداری بهینه، لازم است که ولتاژ مشترکین در محدوده مجاز حفظ شود. با توجه به افزایش استفاده از منابع تجدیدپذیر به‌ویژه منابع بادی و خورشیدی با طبیعت تصادفی، امکان نوسانات ولتاژ در سیستم‌های توزیع وجود دارد. در روش‌های مرسوم از ترانسفورماتورهای دارای تپ‌چنجر، تنظیم‌کننده‌های ولتاژ و بانک‌های خازنی به‌منظور کنترل ولتاژ شبکه توزیع استفاده می‌شود اما این تجهیزات برای مواجهه با تغییرات سریع مناسب نیستند. این مقاله یک دیدگاه کنترلی توزیع‌شده و سلسله‌مراتبی برای حفظ ولتاژ باس‌ها در محدوده مجاز ارائه می‌نماید که مبتنی بر مولدهای مجهز به اینورترهای هوشمند است. طرح پیشنهادی، ابتدا شبکه توزیع را به نواحی مختلف افراز نموده و سپس با تعیین بهینه نقطه کار توان راکتیو مولدهای محدود به هر ناحیه به‌صورت سلسله‌مراتبی در دو سطح هماهنگ ثانویه و بلادرنگ اولیه، پروفیل ولتاژ هر یک از نواحی را به‌طور هوشمند مدیریت می‌کند. ارزیابی مطالعه انجام‌شده بر روی شبکه تست 34 باسه تحت وضعیت‌های مختلف تولید و بار نشان می‌دهد که دیدگاه ارائه‌شده برای مدیریت ولتاژ شبکه توزیع با منابع تجدیدپذیر مناسب است.}, keywords_fa = {مدیریت توزیع‌شده,تنظیم ولتاژ,منبع تولید پراکنده تصادفی,افراز (ناحیه‌بندی) شبکه توزیع,ماتریس حساسیت,کنترل بلادرنگ اولیه,کنترل هماهنگ ثانویه,پخش بار بهینه}, url = {https://tjee.tabrizu.ac.ir/article_5298.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5298_18a411816000e8c7241e426e50a39359.pdf} } @article { author = {Hasheminejad, M. and Farsi, H. and Mehrshad, N.}, title = {Adaptive Ensemble Classification for Speaker Verification}, journal = {TABRIZ JOURNAL OF ELECTRICAL ENGINEERING}, volume = {47}, number = {1}, pages = {345-354}, year = {2017}, publisher = {Faculty of Electrical & Computer Engineering}, issn = {2008-7799}, eissn = {2538-3051}, doi = {}, abstract = {This paper considers the ensemble classification for the text independent speaker verification issue. Using one classifier for the speaker verification may not result in dependable decision, because it may not exploit different characteristics of speech signal. Therefore, state-of-the-art speaker verification systems use an ensemble of classifiers for the verification. Most of the ensemble speaker verification systems use a weighted summation of the score of the individual expert classifiers to calculate the final score of the verification. The weights of this score fusion is obtained using a method, e.g. logistic regression, in the training phase. These works do not efficiently take into account issues such as correlation of classifiers and instance specific behavior of the base classifiers into account. In this paper a new solution is proposed for these two issues by using the process of ensemble design and combination rule based on training data. The obtained results on NIST 2004 speaker evaluation corpus show the effectiveness of the proposed methods in comparison to the sparse classifier fusion, as a baseline method.}, keywords = {Speaker recognition,speaker verification,ensemble classification,adaptive ensemble classification,Logistic Regression}, title_fa = {طبقه‌بندی شورایی تطبیقی برای تصدیق گوینده مستقل از متن}, abstract_fa = {این مقاله مسئله طبقه‌بندی شورایی را برای تصدیق گوینده مستقل از متن بررسی می‌کند. ازآنجاکه ممکن است یک طبقه‌بند از اطلاعات مختلف سیگنال گفتار بهره نبرد، استفاده از یک طبقه‌بند برای تصدیق گوینده ممکن است منجر به تصمیم قابل‌اعتمادی نشود. بنابراین بهترین سامانه‌های تصدیق گوینده از مجموعه‌ای از طبقه‌بندهای مکمل برای رسیدن به تصمیمات قابل‌اعتماد استفاده می‌کنند. در اکثر مطالعات اخیر که روی ترکیب طبقه‌بندها برای تصدیق گوینده انجام شده است، ترکیب خطی وزن‌داری از امتیاز طبقه‌بندهای خبره پایه برای رسیدن به امتیاز نهایی تصدیق استفاده می‌شود که وزن‌های این ترکیب با استفاده از روشی مانند رگرسیون لجستیک و در زمان آموزش به دست می‌آیند. در این تحقیقات مسائلی از قبیل همبستگی بین طبقه‌بندها و برتری برخی طبقه‌بندها برای برخی داده آزمون به‌خوبی در نظر گرفته نشده است. در این مقاله با استفاده از فرایند طراحی شورا و قاعده ترکیب بر اساس داده آزمون برای هر دو مسئله راه‌حلی ارائه می‌شود. بررسی‌های انجام‌شده ما روی دادگان ارزیابی تصدیق گوینده NIST 2004 نشان می‌دهد روش پیشنهادی در مقایسه با روش مبنای ترکیب تنک طبقه‌بندها کارایی مناسبی را دارد.}, keywords_fa = {بازشناسی گوینده,تصدیق گوینده,طبقه‌بندی شورایی,طبقه‌بندی شورایی تطبیقی,رگرسیون لجستیک}, url = {https://tjee.tabrizu.ac.ir/article_5292.html}, eprint = {https://tjee.tabrizu.ac.ir/article_5292_12fc8b5dfc6360bdcaa36bb36a0ec91b.pdf} }